4,7 RATING:
Purchase satisfaction
97,6%
Customer service
97,5%
Shop offer
96,3%

Cart

0 products
Main page > GSM products > JTAG / EMMC Adapters > EMMC cables and adapters

Cables and Adapters for fast reading using EMMC devices

Sort items

Items: 1-20/21 Page: 1/2
1 2 > Go to
Adapter EMMC for Riff BOX (RC1000)
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(3)

17319

Adapter EMMC for Riff BOX (RC1000)

Adapter EMMC for Riff BOX - RC1000 allows a very simple repair phones with blocked JTAG access (GT-i9300 / N7100 / N719 / N7102, etc.), repair phones with damaged JTAG points/pads (access to ROM2 by EMMC) or read/write EMMC applicable for the data recovery/analysis. Using the adapter you can perform format EMMC or low-format (in case of damage EMMC), CMD42 Lock/Unlock/Pasword reset or Samsung eMMC Factory Format. Our adapter allows you to connect in ISP mode (directly onto your phone without removing the EMMC) or Direct (by removing the BGA soldering and the corresponding memory fields or using adapter).

More info
Price: 25.00 EUR w/o VAT
Adapter EMMC/JTAG ATF v2 5in1 GPG
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(1)

21191

Adapter EMMC/JTAG ATF v2 5in1 GPG

Adapter EMMC/JTAG ATF v2 5in1 GPG is leatest edition of GPG adapter for ATF users that allows you to use special JTAG / EMMC / ISP functions with your ATF Box.

More info
Price: 20.00 EUR w/o VAT
Adapter eMMC/JTAG dla Riff Box 2 - RC3000
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(1)

22366

Adapter eMMC/JTAG dla Riff Box 2 - RC3000

Adapter eMMC/JTAG dla Riff Box 2 - RC3000 is an additional adapter for Riff BOX that allows you to solve problems with ISP communication. From now on it is not necessary to desolder the resistor on the CLK bus. Of course, it also allows operation of phones with damaged JTAG points (access to ROM2 via EMMC) or write / read EMMC (applicable for data recovery using the new IDC30 pin connector). Thanks to it you can do EMMC format or low-format in case of EMMC damage, repartitions (Slave / Master) or EMMC cloning. It also allows connection in ISP mode (directly into the phone's board without removing the EMMC chip) and Direct (by removing the BGA chip and soldering to the appropriate memory fields or using an adapter). We connect via JTAG and IDC20 socket.

More info
Price: 18.00 EUR w/o VAT
Adapter eMMC/JTAG for Riff BOX 2 - RC2000
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(1)

21231

Adapter eMMC/JTAG for Riff BOX 2 - RC2000

Adapter eMMC/JTAG for Riff BOX 2 - RC2000 allows a very simple repair phones by JTAG using IDC20 pin connector known from previous riff but offers also support for eMMC using leatest 30 pin connector (IDC 30 pin). By this you can repair phones with blocked JTAG access (GT-i9300 / N7100 / N719 / N7102, etc.), repair phones with damaged JTAG points/pads (access to ROM2 by EMMC) or read/write EMMC applicable for the data recovery/analysis. Using the adapter you can perform format EMMC or low-format (in case of damage EMMC), CMD42 Lock/Unlock/Pasword reset or Samsung eMMC Factory Format. Our adapter allows you to connect in ISP mode (directly onto your phone without removing the EMMC) or Direct (by removing the BGA soldering and the corresponding memory fields or using adapter).

More info
Price: 10.00 EUR w/o VAT
Adapter for ATF 20PIN EMMC - RJ45
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

16973

Adapter for ATF 20PIN EMMC - RJ45

Adapter for ATF 20PIN EMMC - RJ45 is used to allow connection EMMC Adapter with 20 pin connector to ATF Box.

More info
Price: 4.00 EUR w/o VAT
Adapter GPG-FT232 dla GPG eMMC Box
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

15020

Adapter GPG-FT232 dla GPG eMMC Box

Adapter GPG-FT232 dla GPG eMMC Box is to solve all of connectivity ISP issue such as: eMMC ORC: 00000000, bad code ! >> Id check lost.

More info
Price: 39.00 EUR w/o VAT
Adapter Riff 2 Emate Pro USocket
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

21620

Adapter Riff 2 Emate Pro USocket

Adapter Riff 2 Emate Pro USocket it's additional adapter for eMate Moorc PRO v1 edition which allows to use universal BGA socket and connect it to Riff 2 box for eMMC reading.

More info
Price: 8.00 EUR w/o VAT
E-Mate Pro eMMC Tool MoorC v3
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(2)

21886

E-Mate Pro eMMC Tool MoorC v3

E-Mate Pro eMMC Tool MoorC v3 - 2017 is the latest version of the MoorC adapter for all eMMC direct connection which allows read and write interface. The adapter is compatible with many emmc devices, such as Riff Box, Riff Box 2, Medusa Pro Box, Z3X Easy Jtag Box, GPG EMMC Box, UFi Box etc. New additionally equipped with short-circuit protection, additional adapter for 10x11mm systems, data and commnd pullups (Data / CMD) and improved support for UFI BOX

reseler

More info
Price: 129.00 EUR w/o VAT
E-Tool eMMC 5in1 Reader/Adapter
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

22022

E-Tool eMMC 5in1 Reader/Adapter

E-Tool eMMC 5in1 Reader/Adapter is needed to read / write eMMC chips using your professional eMMC tool, it allows you to perform direct chip reading and writing of eMMC chips. Compatible with many emmc tools including Riff Box 2, Medusa Pro Box, Z3X Easy Jtag Box, GPG EMMC Box, UFi Box etc.

More info
Price: 129.00 EUR w/o VAT
EMMC adapter for Easy Z3x JTAG Box
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(3)

13278

EMMC adapter for Easy Z3x JTAG Box

EMMC adapter for Easy Z3x JTAG Box allows to easy repair of phones with disabled access to bootloader via DCC (GT-i9300/N7100/N719/N7102) or phones with demaged JTAG pinouts (access to ROM2 by EMMC). Adapter allows also in PRO version for low level formating of EMMC, easy one button repair boot via EMMC Direct, repartition Slave/Master. Our adapter you can use for ISP (in phone board) and direct connection.

More info
Price: 12.00 EUR w/o VAT
EMMC Adapter for Nokia Lumia 535
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

16972

EMMC Adapter for Nokia Lumia 535

Precise EMMC Adapter for Nokia Lumia 535 adapter it's special PCB with mounted pins to allow for repair boot, create full dump of flash by EMMC IPS connection in Lumia 535 phones without any soldering to PCB using EMMC devices as ATF, GPG EMMC or Z3x EMMC BOX
Supported phones: Nokia Lumia 535
Compatible with: ATF, GPG EMMC or Z3x EMMC BOX

More info
Price: 18.00 EUR w/o VAT
EMMC Z3X JTAG Pro 3in1 Adaptor
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

14272

EMMC Z3X JTAG Pro 3in1 Adaptor

EMMC Z3X JTAG Pro 3in1 Adaptor GPG allows to easy repair of phones with disabled access to bootloader via DCC (GT-i9300/N7100/N719/N7102) or phones with demaged JTAG pinouts (access to ROM2 by EMMC). In PRO version allows low level formating of EMMC, easy one button repair boot via EMMC Direct, repartition Slave/Master. Adapter you can use for BGA direct connection.

More info
Price: 10.00 EUR w/o VAT
Jumper wire/Copper spool wire 0.10mm/50m
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

17312

Jumper wire/Copper spool wire 0.10mm/50m

Jumper wire/Copper spool wire 0.10mm/50m is a thin (0.10mm) insulated wire to make precise connections - are ideal for connecting corroded tracks in phones and other repair work. Thanks to its thick it also successfully used for soldering JTAG and when reading dump by EMMC

More info
Price: 5.00 EUR w/o VAT
Moorc E-Mate X 13in1 - 2018
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(4)

22089

Moorc E-Mate X 13in1 - 2018

Moorc E-Mate X 13in1 - 2018 is the latest version of a set of adapters allowing for direct eMMC memory connection and read and/or write it contest. Adapter/Socket is fully compatible with many eMMC devices, such as Riff Box, Riff Box 2, Medusa Pro Box, Z3X Easy Jtag Box, Easy Z3x Plus, GPG EMMC Box, UFi Box, etc. The new version in comparison to the 2017 edition allows in addition to previously supported pinouts also reading the latest eMMCs BGA254, BGA100, BGA136, BGA168.

reseler

More info
Price: 149.00 EUR w/o VAT
Multicolored M-M cables 17 cm to the contact plate - 40 pcs
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

21209

Multicolored M-M cables 17 cm to the contact plate - 40 pcs

Multicolored M-M cables 17 cm to the contact plate - 40 pcs is a set of different colored wires connecting M-M ideally suited for making connections between the contact plates and sets of commissioning. Wires can be easily separated from each other - great to use with JTAG/eMMC connections.

More info
Price: 3.60 EUR w/o VAT
SD-EMMC Plus Adapter - Model SE-P1
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(14)

21681

SD-EMMC Plus Adapter - Model SE-P1

SD-EMMC Plus Adapter - Model SE-P1 is the latest adapter to connect eMMC memory using ISP or after Chip-Off by ordinary SD card reader or MMC Plus card reader (8-bit transmission). In addition, the adapter has a possibility to choose whether the power to eMMC (VCC and VCCq) is taken from the reader, ie. 3.3V or from an external power source Lab power supply (VccQ and Vcc)

More info
Price: 17.00 EUR w/o VAT
Set 140 pcs. Of wires to the contact plate WJW-70
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

21210

Set 140 pcs. Of wires to the contact plate WJW-70

Set 140 pcs. Of wires to the contact plate WJW-70B kit includes jumper connecting different length and color, to be joined on the fields included in our ofercie.płytkach contact. Content of 140 different colored jumper lengths of 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, 125mm. The whole is packaged in a box aesthetic.

More info
Price: 4.80 EUR w/o VAT
Set of 40 pcs. M-F cables in various colors with a length of 17 cm
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

21208

Set of 40 pcs. M-F cables in various colors with a length of 17 cm

Set of 40 pcs. M-F cables in various colors with a length of 17 cm is a set of different colored wires connecting M-F ideally suited for making connections between the contact plates and sets of commissioning. Wires can be easily separated from each other - great to use with JTAG/eMMC connections.

More info
Price: 3.60 EUR w/o VAT
Universal JTAG/eMMC/FBUS JE-02 adapter
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(1)

21225

Universal JTAG/eMMC/FBUS JE-02 adapter

Universal JTAG/eMMC/FBUS JE-02 adapter it's fully configurable universal adapter that allows you fully configure connection for diffrent JTAG/eMMC devices (Medusa PRO, Riff Box, GPG eMMC,. ORT) but also those which use Rj45/RJ48 for communication (ATF Nitro, ATF Gold, Medusa, OctoPlus). Adapter helps you in connection to target if you wish to solder to your phone/modem PCB using wires but want to configure it for your needs.. On adapter you will find all signals used in Riff Box JTAG
Compatible: Omnia Repair Tool (ORT), Riff JTAG, GPG JTAG PRO, Easy Z3x JTAG, GPG eMMC. Medusa, MEdusa PRO, ATF nitro, ATF Gold, eMMC PRO, OctoPlus JTAG

More info
Price: 20.00 EUR w/o VAT
Adapter GPG eMMC BGA 162
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

15018

Adapter GPG eMMC BGA 162

Adapter GPG eMMC BGA 162 allows you to flash phones eMMC memory, working with GPG EMMC, EASY Z3X JTAG and others boxes support read write eMMC/ISP.

More info
Price: 99.00 EUR w/o VAT
1 2 > Go to