4,8 RATING:
Purchase satisfaction
94,9%
Customer service
94,2%
Shop offer
92,9%

Cart

0 products
Main page > Data Analysis and Forensic Tools > VR-TABLE > VR-Table eMMC/eMCP/JTAG ISP > VR-TABLE for JTAG EMMC FBUS Tool

VR-TABLE for JTAG EMMC FBUS Tool

4.7 (3)
Price: 1049,00 EUR w/o VAT
Select product properties:
Hardware version:
Probe type: ?

Quantity

ID: 17327

Product weight: 15.00 kg

Add to store products

Ask for product

VR-TABLE for JTAG/EMMC/FBUS Tool is a precision tool for non-invasive ISP (ie, In System Programming) Reading and writing via EMMC, JTAG which replaces the need for soldering or desoldering anything in motherboard. VRTable enables forensic examiners to acquire data from Mobile Devices, GPS Devices and other electronics units. Optimization is based on a fully individually configurable VR-ARMS ended precision probes and additional reference voltages for all types of memory. VRTable can be also freely used in the car diagnostics (car radios, controllers) as well as in FBUS communication mode - completely replacing the RJ45/RJ48 cables.






VR-TABLE specification (depends on option) :

  • equipied with 7 or 10* 300 mm (VR-ARMS) with hydraulic (central) block, ended with precise tips for read/write via ISP JTAG/EMMC as also using FBUS. Each of Varms can be freely configured/placed along target motherboard

  • 10 mm thick polished guides handles with lock system ensures optimal placement of equipment at the desired location

  • central VR-ARM allows locate the servicing device (JTAG, EMMC BOxex) safely without fear of his movement exactly over a target - by this you are close to target and avoid communication errors

  • * Light with a magnifying glass and glass lens 5D MA-1225CF: AC230V, dustproof cover to protect the lens. 22-watt T5 loader. The flexible arm allows any change angle and direct the light where you need it most

  • high quality plastic finished non-slip pads, which absorb vibrations and oscillations

  • set of 10 embedded on-board channels with gold-plated connectors (L1, L2 .... / R1, R2 ....) connected to the socket IDC 10 that can be used in any TTL/FBUS communicatiions

  • 2-2 banane type of cables that allows to sniff communication by puttign each cable into one., ie: osciloscope

  • onboard USB connection cable for better cable routing

  • internal voltage VCC/VCCQ build-in for EMMC/JTAG (3,3V, 2,85V, 1,8V)

  • maked from high quality of TecaForm AH Black and brushed aluminium

    *options





    Dedicated for:

  • forensic examiners and forensic laboratories
  • investigators and court experts
  • Electronic services: phones, tablets, car radios, GPS and other electronic devices
  • car diagnostics
  • diagnostics equipment: replacing cables communication FBUS



    Universal Tool for all devices, ie:

    • EMMC Pro Tool
    • GPG EMMC
    • ORT JTAG Pro with EMMC Tool
    • Z3X Easy Jtag
    • Riff Box
    • Medusa Pro Box
    • Medusa Box
    • ATF i innne
    • Martech Clip / Martech BOX III


    Information about configurations:

    • EMMC: 7 VRArms version needed
    • JTAG: 10 VRArms version needed
    • FBUS/TTL: 10 VRArms version needed




















    Photos with description of device:

    VCC/VCCQ outputs 3,3, 2.85, 1,8



    TTL/IDC connector from L1, L2... / R1, R2 sockets



    Communications channels for TTL/FBUS connection with full description





    Back USB routing allows easy USB device connection to table



    10 mm thick polished guides handles with lock system ensures optimal placement of equipment at the desired location.






    VR-ARMS: equipied with 7 or 10* 300 mm (VR-ARMS) with hydraulic (central) block, ended with precise tips for read/write via ISP JTAG/EMMC as also using FBUS. Each of Varms can be freely configured/placed along target motherboard



    Central VR-ARM allows locate the servicing device (JTAG, EMMC BOxex) safely without fear of his movement exactly over a target - by this you are close to target and avoid communication errors



    Available with magnifying glass and glass lens 5D MA-1225CF: AC230V, dustproof cover to protect the lens. 22-watt T5 loader. The flexible arm allows any change angle and direct the light where you need it most









    Complete of 7 ARM edition:
    - VR-Table main unit
    - 6 VRArms 300mm for JTAG/EMMC/FBUS
    - 8 probes for putting into VR Arms
    - 6 communication cables banana of use with FBUS/VCC/VCCq
    - 1 x VR Holder ARM
    - 1 x VR holder for devices
    - 1 x Universal JE-02 RJ45/Rj48/IDC 20 pin adapter for various devices with config page
    - 1 x 17cm connection cables for signal routing from JE-02 adapter
    - USB ferrite cable
    - TORX key
    - Suit case where VR can be stored for travel
    - PROSKIT lamp with a magnifying glass 5D*
    * - options

    Complete of 7 ARM edition:
    - VR-Table main unit
    - 9 VRArms 300mm for JTAG/EMMC/FBUS
    - 11 probes for putting into VR Arms
    - 9 communication cables banana of use with FBUS/VCC/VCCq
    - 1 x VR Holder ARM
    - 1 x VR holder for devices
    - 1 x Universal JE-02 RJ45/Rj48/IDC 20 pin adapter for various devices with config page
    - 1 x 17cm connection cables for signal routing from JE-02 adapter
    - USB ferrite cable
    - TORX key
    - Suit case where VR can be stored for travel
    - PROSKIT lamp with a magnifying glass 5D*
    * - options


    Warranty


    We offer 12 months warranty for this product
  • Product weight: 15.00 kg.
    Country:
    Courier:
    Delivery time: 3-7 working days
    Shipping cost: 136.31 EUR

    NEGOTIATE PRICE

    PDF
    If you are interested in VR-TABLE for JTAG EMMC FBUS Tool you will probably want to take a look at following products:

    Dedicated devices for this cable

    USB cable Prolific PL2303X with 4mm banana connectors VR70/73M + USB cable Prolific PL2303X with 4mm banana connectors VR70/73M more
    Price:
    15.00 EUR w/o VAT

    Available also additional modules:

    Set of 10 standard probes VR-070 1mm/73mm to VR-Table + Set of 10 standard probes VR-070 1mm/73mm to VR-Table more
    Price:
    50.00 EUR w/o VAT
    Set of 10 ultra probes VR-073m 0,50mm/73mm to VR-Table + Set of 10 ultra probes VR-073m 0,50mm/73mm to VR-Table more
    Price:
    99.00 EUR w/o VAT
    Set of 10 high-precision probes with movable pins VR-064 1mm / 69mm to VR-Table + Set of 10 high-precision probes with movable pins VR-064 1mm / 69mm to VR-Table more
    Price:
    89.00 EUR w/o VAT
    Prolific PL2303X USB cable with FF connectors (VR64) + Prolific PL2303X USB cable with FF connectors (VR64) more
    Price:
    20.00 EUR w/o VAT
    USB cable (D+, D-, 5V, GND) with FF cables (VR64M) + USB cable (D+, D-, 5V, GND) with FF cables (VR64M) more
    Price:
    15.00 EUR w/o VAT
    Universal PullUp PU eMMC cable for VR-Table (VR64) + Universal PullUp PU eMMC cable for VR-Table (VR64) more
    Price:
    20.00 EUR w/o VAT

    Other products from same category

    RIFF Box 2 - JTAG/EMMC/I2C ORIGINAL + RIFF Box 2 - JTAG/EMMC/I2C ORIGINAL more
    Price:
    159.00 EUR w/o VAT

    Suggested items for this device:

    ORT EMMC Booster + ORT EMMC Booster more
    Price:
    39.00 EUR w/o VAT

    Suggested hardware for use with above set

    Below you will find special hardware that it's suggested to use with this set.

    Inspection camera for VR-Table - VGA 2Mpx with holder + Inspection camera for VR-Table - VGA 2Mpx with holder more
    Price:
    229.00 EUR w/o VAT

    See also

    Universal eMMC PullUp PU cable for ISP eMMC to VR-Table (VR70/VR73M) + Universal eMMC PullUp PU cable for ISP eMMC to VR-Table (VR70/VR73M) more
    Price:
    20.00 EUR w/o VAT
    RIFF Box JTAG/EMMC ORIGINAL + RIFF Box JTAG/EMMC ORIGINAL more
    Price:
    119.00 EUR w/o VAT
    Programmer UFS / eMMC / eMCP NuProg-E + Programmer UFS / eMMC / eMCP NuProg-E more
    Price:
    1149.00 EUR w/o VAT
    Passware Kit Forensic + Passware Kit Forensic more
    Price:
    1095.00 EUR w/o VAT
    Medusa Pro Box (JTAG i EMMC) + Medusa Pro Box (JTAG i EMMC) more
    Price:
    159.00 EUR w/o VAT
    GPG EMMC JTAG Box Full + 33 JIG + GPG EMMC JTAG Box Full + 33 JIG more
    Price:
    199.00 EUR w/o VAT
    GPG EMMC JTAG Box + GPG EMMC JTAG Box more
    Price:
    169.00 EUR w/o VAT
    ATF GOLD - Advance Turbo Flasher + ATF Network + JTAG EMMC + ATF GOLD - Advance Turbo Flasher + ATF Network + JTAG EMMC more
    Price:
    159.00 EUR w/o VAT

    You might also be interested in:

    Holder for inspection camera used in VR-Table + Holder for inspection camera used in VR-Table more
    Price:
    50.00 EUR w/o VAT
    Set of Universal JTAG adapters VF-JIG for VR-Table - 11R + Set of Universal JTAG adapters VF-JIG for VR-Table - 11R more
    Price:
    219.00 EUR w/o VAT
    VRArm 300mm for VR-Table + VRArm 300mm for VR-Table more
    Price:
    80.00 EUR w/o VAT
    Inspection camera for VR-Table - VGA 2Mpx with holder + Inspection camera for VR-Table - VGA 2Mpx with holder more
    Price:
    229.00 EUR w/o VAT

    Note

    1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.

    2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.

    3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.

    Reviews

    The listed opinions/reviews come only from customers who have purchased a given product/service in our online store. See what they think about a given product or service

    Super produkt . Wysoka jakosc wykonania, robiaca wrazenie precyzja. Akcesoria rowniez z najwyzszej polki. Naprawde wart swojej ceny.
    Gestion eficiente. Comunicacacion lfuida con el vendedor.