4,8 RATING:
Purchase satisfaction
94,9%
Customer service
94,2%
Shop offer
92,9%

Cart

0 products
Main page > Repair Equipment > Soldering Equipment > BGA Rework stations > Tornado Infra PRO held station

Tornado Infra PRO held station

Price: 319,00 EUR w/o VAT
Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

ID: 7217

Product weight: 2.96 kg

Add to store products

Ask for product

Tornado Infra PRO held station it's new version with bigger ceramic IR first hand held infra rework station. Best way to operate BGA chipset from laptop motherboards. Here is an honest attempt to give infra rework at reasonable price without any degradation in quality. Our product has been built using one of the best infrared techniques an best to use with lead-free PCB's.


Specification:

Pre Heater:
• Surface rating: 76.8 kW/m²
• Maximum permissible temperature: 900 °C
• Wavelength range: 2 - 10 μm
• Lifetime: more than 3000 hours


Heating element specifications:
• Iron-chrome aluminum resistance wire
• Heater Voltage: 230 Volts standard.
• Electrical Power Loading: 6.8 W/cm² (43.5W/inch)
• Useful wavelength range: 2 to 10 Microns.
• Average Operating Life: 5,000 - 10,000 Hours.
• Mean Maximum Surface Temperature: 685°C
• Approximate Time Until Top Temperature: 8 minutes

Photo of device:


Photo of device with preheater TOrnado






Most common questions:
Question: What is a ceramic infrared radiator?
Answer: Ceramic IR radiators are electrical heating elements consisting mainly out of a technical ceramic being high-temperature resistant. Read More

Question: What is the application for an ceramic heating element?
Answer: IR heating elements are used for an endless number of heating and drying applications. A selection of IR heating and drying applications has been placed on our Website under applications. For determining if electric heating elements can be used for your application we provide consulting and test devices. If required we can do heating and drying tests in our laboratory, too. Read More

Question: Which advantages does an electric infrared heater have?
Answer: Electric IR heaters have among others the following advantages: Long service life due to an embedded heating coil. Surface is clean and does not oxidise. Read More

Question: What is the wavelength of an ceramic infrared emitter?
Answer: Electric IR emitters provide only the non-visible infrared radiation and no visible or rather hardly visible light. The emitted infrared radiation covers the medium and long-wave infrared range of 2 - 10 µm. Read More

Question: Does an infrared radiant heater fulfill clean room requirements?
Answer: Yes. For decades IR radiant heaters have been used in clean rooms class 100 or better. They are used in semiconductor production, in the pharmaceutical industry and in manufacturing picture tubes. Infrared Radiators are also used in the production of modern TFT displays. Read More

Question: What is the optimal distance between infrared radiators and good to be heated?
Answer: In the case of heat-sensitive goods (paper, thin foils) the radiation distance should not be less than 50 mm. If the radiators are not mounted densely next to each other, the distance must be larger if the goods to be heated are stationary. If the distance between radiators is 3 - 4 cm, a distance between radiators and goods of 15 - 20 cm is required in order to achieve uniform heating. Read More

Question: Can infrared radiant heating elements be used to heat metals?
Answer: Bright metal shows a relatively weak absorption of infrared radiation. However, corroded, roughened, coated, enameled or painted metal can reach an absorption degree of more than 90%. Read More

Question: Are infrared heaters susceptible to splash water?
Answer: When hot, infrared emitters are splash resistant. If the radiators get in touch with water when they are cold, they must subsequently dry at a low temperature (max. 80°C) for a few minutes



The heat up curves for ceramic heater are as shown below








Package contains:
- Infra Tornado PRO station
- mulimter/termometr for measuring temp from Infra
- flux


WARRANTY


We offer 6 months of warranty for this product
Product weight: 2.96 kg.
Country:
Courier:
Delivery time: 3-7 working days
Shipping cost: 73.20 EUR

NEGOTIATE PRICE

PDF
If you are interested in Tornado Infra PRO held station you will probably want to take a look at following products:

See also

Infra held stand + Infra held stand more
Price:
89.00 EUR w/o VAT
Scotle station IR PRO SC v4 BGA 2,8kW USB + Scotle station IR PRO SC v4 BGA 2,8kW USB more
Price:
1099.00 EUR w/o VAT
BGA Station Scotle IR6000 v2 + BGA Station Scotle IR6000 v2 more
Price:
529.00 EUR w/o VAT
Tornado Infra held station + Tornado Infra held station more
Price:
259.00 EUR w/o VAT
Infra station held unit + Infra station held unit more
Price:
119.00 EUR w/o VAT
Heat element for Tornado Infra + Heat element for Tornado Infra more
Price:
79.00 EUR w/o VAT

This product was bought most often with:

Solder GEL for repair  - type ALPHA RMA 7 + Solder GEL for repair - type ALPHA RMA 7 more
Price:
14.00 EUR w/o VAT
Rework + Rework "no clean" - soldering help pen more
Price:
10.00 EUR w/o VAT
Infra held stand + Infra held stand more
Price:
89.00 EUR w/o VAT
Cobra Light 360 + Cobra Light 360 more
Price:
44.00 EUR w/o VAT
LCD Opener + LCD Opener more
Price:
4.00 EUR w/o VAT
Solder liquid flux TK83 - 100ml + Solder liquid flux TK83 - 100ml more
Price:
5.30 EUR w/o VAT
Microscope SZM7045-STL2 + Microscope SZM7045-STL2 more
Price:
592.00 EUR w/o VAT

Note

1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.

2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.

3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.