Switchable USB Yepkit

YKUSH XS Yepkit USB Switchable Hub is a switch a USB device ON/OFF remotely from software using YKUSH XS. YKUSH XS is a single downstream port USB hub which can be commanded to switch ON/OFF the downstream port, effectively disconnecting/connecting the USB device connected to the YKUSH XS. The control commands are issued from the USB host, typically a PC to which the YKUSH XS is connected. We provide an open source control software which can be used out of the box to control the YKUSH XS. This software can also be used as a reference or starting point for integration into other applications or custom developments.

YKUSH 3 Yepkit USB 3.1 Switchable Hub is a three downstream port USB 3.1 Gen 1 switchable hub, where the downstream ports can be individually switch ON/OFF. The switching is controlled by software from the host system (typically a PC to which the YKUSH 3 is connected). The ykushcmd application, available for download, can be used to control the YKUSH 3 board.When a downstream is switched OFF, both the port power (VBUS) and all the data-lines (both the USB 3.1 and USB 2.0 data-lines) are switched OFF, effectively disconnecting the port. The YKUSH 3 hub is compliant with USB 3.1 Gen 1 and USB 2.0 ports with 5Gbps, 480Mbps, 12Mbps and 1.5Mbps operation. The support of very high data rates makes it suitable to data intensive applications (e.g., storage solutions) and for streaming and real time data solutions.

YKUR Yepkit USB is relay board with USB and I2C controllable relay board with one in-board relay and four additional relay driver ports. The relay driver ports can be used to drive both mechanical and solid state relays (SSR). When connected through USB to a PC (or other USB Host), YKUR is seen as an HID USB device which does not require the installation of drivers and becomes automatically available to the control application software ykurcmd.