 |
OCA technology
Browse
List
Gallery
15926 |
Chamber Holder for autoclave is specially designed holder for comfortable placement of adhesive displays inside autoclave cylinder. On one side have 4 row 7mm width and on second side have 5 row 3mm width. |
 |
|
17044 |
Gasket / O-ring sealing for Scotle Autoclave Mini Gasket / O-ring sealing for Scotle Autoclave Mini is a backup O-ring into autoclave Scotle Mini |
|
|
|
22335 |
LCD laminator with autoclave TBK-508A LCD laminator with autoclave TBK-508A - is an integrated device for repairing LCD displays. The built-in laminator is intended for initial thermal (about 40-50C) connecting the LCD display with the telephone glass using OCA adhesive patches. The whole process involves pressing both connected elements with a heated pressure press on pressure up to 3-5kg / cm2 under vacuum (-94 .. -98kPa). We use the autoclave function with koei if as a result of this process small air bubbles remain. The built-in autoclave is intended for the final thermal pressure gluing of the LCD screen and the telephone glass using solid adhesive OCA patches and removing air bubbles. |
|
|
|
22332 |
UYUE X6 AUTOCLAVE 13.4 " - FOR REPAIR OF BREAKED WINDOWS OF TELEPHONES. The UYUE X6 autoclave is designed for thermal, pressure-bonding of the LCD screen and telephone glass using OCA adhesive patches and removing air bubbles. This is the last element of the LCD screen repair process after a vacuum laminator. The use of a pressure-vacuum laminator eliminates the possibility of air bubbles that may appear some time after the end of the process if only the autoclave is used. The procedure of connecting the fast (digitizer) with the display is done by heating the above elements under high pressure, resulting in the final removal of air bubbles, melting and hardening of OCA glue. The whole process takes about 10 minutes. The autoclave is designed for LCD screens: LCD (TFT, IPS, Retina, Super LCD), OLED (AMOLED, Super AMOLED, Clear Black). |
|
|
|
22261 |
Autoclav LCD displays OCA method GM-838 V3 13" Autoclav LCD displays OCA method GM-838 V3 13" is designed for removes bubbles and adhesive LCD displays by OCA method. Procedure for bonding glass (digitizer) with display is done by heating under pressure of these elements, resulting in is removal of air bubbles and melting and curing the adhesive OCA. The autoclave is recommended for bonding LCD displays (TFT, IPS, Retina, Super LCD), because it prevents damage to the backlight layer, which may take place during the bonding process displays by LOCA. Autoclave can also be used with displays OLED (AMOLED, Super AMOLED, Clear Black). |
|
|
|
22260 |
Autoclave LCD displays OCA method GM-838 V2 17,7" Autoclave LCD displays OCA method GM-838 V2 17,7" is designed for removes bubbles and adhesive LCD displays by OCA method. Procedure for bonding glass (digitizer) with display is done by heating under pressure of these elements, resulting in is removal of air bubbles and melting and curing the adhesive OCA. The autoclave is recommended for bonding LCD displays (TFT, IPS, Retina, Super LCD), because it prevents damage to the backlight layer, which may take place during the bonding process displays by LOCA. Autoclave can also be used with displays OLED (AMOLED, Super AMOLED, Clear Black). |
|
|
|
17010 |
Autoclave OCA GM-838 16,3" is designed for removes bubbles and adhesive LCD displays by OCA method. Procedure for bonding glass (digitizer) with display is done by heating under pressure of these elements, resulting in is removal of air bubbles and melting and curing the adhesive OCA. The autoclave is recommended for bonding LCD displays (TFT, IPS, Retina, Super LCD), because it prevents damage to the backlight layer, which may take place during the bonding process displays by LOCA. Autoclave can also be used with displays OLED (AMOLED, Super AMOLED, Clear Black). |
|
|
|
22166 |
OCA M-TA04CK LCD 8'' autoclave OCA M-TA04CK LCD 8'' autoclave is designed for thermal pressure bonding of the LCD screen and fast phone with the use of OCA adhesive plasters in the form of solid and air bubbles removal. This is the last element in the process of repairing LCD screens on a vacuum-pressure laminator. The use of a vacuum-pressure laminator eliminates the possibility of air bubbles that may appear after a certain time from the end of the process in case only the OCA autoclave will be used. The procedure of joining the glass (digitizer) with the display is done by heating the above elements under high pressure, causing the final removal of air bubbles, melting and curing of the OCA adhesive. The whole process takes 10-15 minutes. The autoclave is designed for LCD screens: LCD (TFT, IPS, Retina, Super LCD), OLED (AMOLED, Super AMOLED, Clear Black) |
|
|
|
16998 |
Autoclave OCAMaster OM-A1 (Air Bubble Machine) is designed for removes bubbles and adhesive LCD displays by OCA method. Procedure for bonding glass (digitizer) with display is done by heating under pressure of these elements, resulting in is removal of air bubbles and melting and curing the adhesive OCA. The autoclave is recommended for bonding LCD displays (TFT, IPS, Retina, Super LCD), because it prevents damage to the backlight layer, which may take place during the bonding process displays by LOCA. Autoclave can also be used with displays OLED (AMOLED, Super AMOLED, Clear Black). |
|
|
|
15927 |
Autoclave OCA Scotle Mini is designed for removes bubbles and adhesive LCD displays by OCA method. Procedure for bonding glass (digitizer) with display is done by heating under pressure of these elements, resulting in is removal of air bubbles and melting and curing the adhesive OCA. The autoclave is recommended for bonding LCD displays (TFT, IPS, Retina, Super LCD), because it prevents damage to the backlight layer, which may take place during the bonding process displays by LOCA. Autoclave can also be used with displays OLED (AMOLED, Super AMOLED, Clear Black). |
|
|
|
