USB Stabilizers / Blockers

Yepkit USB Switchable Hub by YKUSH boards allow the user to selectively switch ON and OFF the power of each of the USB devices connected to the Hub downstream ports. The control is done using an application in the host system (e.g., PC to which the YKUSH board is connected). Switching ON/OFF a YKUSH downstream port with a device connected to it has the same effect than physically Connecting/Disconnecting a Device to a port of a typical USB hub.

DeepSpar PRO USB Stabilizer allows any Windows software to quickly and reliably work with unstable/degraded USB storage devices. It is a combination of software and a hardware device which connects between the PC and USB source drive. The source drive shows up in Windows as if it was connected directly, allowing any software to work with it.

Multi-COM to autoryzowany dystrybutor DeepSpar na terenie ca³ej Europy !

DeepSpar USB Stabilizer 10Gb allows any Windows software to quickly and reliably work with unstable/degraded USB storage devices. It is a combination of software and a hardware device which connects between the PC and USB source drive. The source drive shows up in Windows as if it was connected directly, allowing any software to work with it. The 10Gb version supports USB versions 3.1 and 3.2 (SuperSpeed+) and allows reading from 3 devices at the same time. and has 5 ports (USB C 3.0, 2x USB A 3.0, M.2 NVMe port with M key).

Guardonix USB 3.0 Writeblocker a feature-rich writeblocker which enables Windows applications to work with damaged/unstable storage devices, substantially accelerates flash storage acquisitions. Guardonix hardware stands between the PC and storage device, making sure that the connection to the PC is always well-maintained, regardless of the storage device status. This way even if the storage device becomes desynchronized, only its connection to Guardonix hardware will be reinitialized, which will not have any impact on the PC, allowing data acquisition to proceed without interruption. Guardonix hardware maintains a live connection even if the storage device is physically disconnected during imaging.

Multi-COM to autoryzowany dystrybutor producenta DeepSpar na terenie ca³ej Europy !

Set of adapters for USB Stabilizer / Guardonix is ​​an original set of adapters from Deepspar for USB Stabilizer or Guardonix devices. The set includes SATA, NVMe PCIe M.2 M-key, AHCI PCIe M.2 M-key and Apple 12 + 16 pin PCIe SSDs adapters, which allow you to connect all devices using these standards to a USB Stabilizer or Guardonix device.

YKUSH 3 Yepkit USB 3.1 Switchable Hub is a three downstream port USB 3.1 Gen 1 switchable hub, where the downstream ports can be individually switch ON/OFF. The switching is controlled by software from the host system (typically a PC to which the YKUSH 3 is connected). The ykushcmd application, available for download, can be used to control the YKUSH 3 board.When a downstream is switched OFF, both the port power (VBUS) and all the data-lines (both the USB 3.1 and USB 2.0 data-lines) are switched OFF, effectively disconnecting the port. The YKUSH 3 hub is compliant with USB 3.1 Gen 1 and USB 2.0 ports with 5Gbps, 480Mbps, 12Mbps and 1.5Mbps operation. The support of very high data rates makes it suitable to data intensive applications (e.g., storage solutions) and for streaming and real time data solutions.

YKUR Yepkit USB is relay board with USB and I2C controllable relay board with one in-board relay and four additional relay driver ports. The relay driver ports can be used to drive both mechanical and solid state relays (SSR). When connected through USB to a PC (or other USB Host), YKUR is seen as an HID USB device which does not require the installation of drivers and becomes automatically available to the control application software ykurcmd.