LCD OCA Repair set FG600 - Professional version

LCD OCA Repair set FG600 - Professional version it's the professional complete set of equipment / machinery for LCD repair in OCA technology which includes semi-automatic separator TBK 958, semi-automatic degumming machine CP-127, precise MTriangel separator, automatic press and autoclave TBK 608, laminar dust free desk DF1200 and all necessary connection cables .

Semi Automatic Vacuum separator TBK 958 allows in easy and efective way cut out broken/demaged glass from LCD to apply new one. On manual version operator must process correctyl molybden wire - here it's maked by machine. Instead of using holders this models uses vacuum for holding down LCD - just put LCD on the heating panel, turn on "Vacuum Pump" switch, then you can separate the glass. LCD separator equip with anti-slip mounting seats. It makes your work smoothly and decreases the opportunity of damaging LCD assembly. This machine set can help separate the cell phone’s touch screen from LCD, or touch screen from front glass lens.

Used to:
- safe LCD/glass/digitzer remove
- supporting HTC, Samsung, Iphones etc.

Features:
- Supports displays up to 7 inches
- accurate microprocessor controller used in high end BGA stations
- High temperature stability on aluminium plate table
- Bearing rails to conduct the molybdenum wire
- Simultaneous viewing of set and actual temperature
- Maximal heating area in relation to power consuption
- HIgh quality resistive heater
- Handles mounted outside the heater (do not block the heating surface)

Phots of device:






Specifications:
- Power: 300W
- Power supply 220-240V 50/60Hz
- Controller: Rex-C100
- Tepmperatury range: 0-400C
- Size: 300*480*230 mm
- Dimensions of heating area: 100x200mm
- Weight: 16.4 kg

Automatic frame laminator (degumming ) machine M-TRIANGEL CP-127 300W is used to connect the hot new bezel frame and the glass in the iPhone as also for removing damaged polarizer and LOCA/OCA adhesive from LCD. The set includes molds for iPhone 4/4S, 5/5S, 6/6S, 6+ /+ 6S. Laminator fully electric - no requires pumps and compressors to work.

Technical data:
- Supply voltage: 220-240VAC
- Power: 300W
- Overall dimension: 35x36x42cm
- Laminating temperature: 160 ° C
- Net weight: approx. 17kg









Laminator has:

Automatic mode (just slide the lower mold and the top is lowered automatically)
- Working Temperature:120-130℃
- Time:10S-15S
- Compatible with: iPhone 4/4s, iPhone 5/5s, iPhone 6/6s, iPhone 6plus/6s plus

- Manual mode (press two side buttons)
- Working Temperature:120-130℃
- Time:10S-15S
- Compatible with: iPhone 4/4s, iPhone 5/5s, iPhone 6/6s, iPhone 6plus/6s plus

- Delamination mode (the ability to remove the LOCA adhesive and polarizers LCD 7"- 14,5x10cm)
- Working Temperature:180℃(Recommend)
- Compatible with: All screens under 7 inch


Set contains:
- Laminator frames iPhone M-TRIANGEL CP-127 with delamination function
- Mold lamination frames iPhone 4 / 4S, 5 / 5S, 6 / 6S, 6 + / 6S + (4 pcs)
- Mold delamination and glue remover
- power cable
- Blade 10x180mm (10p)
- The original carton

Precision Vacuum Laminator M-TRIANGEL 2 in 1 with build-in pump is used to apply tapes OCA glue or polarize filter on phone display. The device is characterized by high precision, quickly repair LCD, improve repair efficiency and easy operation.







Features:
- built-in vacuum pump
- precise positioning mechanism of the lower area of the suction using the 3 nanoscale screws
- repeatability of the process
- for apply OCA, polarizers and LCD protective layers up to 6"
- built-in USB port for external devices

Specifications:
- dimensions 30x27x27cm
- width of the lower vacuum: 16x8,3cm
- width of the upper vacuum: 13x8,5cm
- weight: approx. 10kg
- power: 100W

Automatic LCD press (vacuum laminator) whith build-in autoclave TBK-608 12'' is controlled by touch screen fully automatic vacuum-pressure laminator with built-in LCD autoclave, compressor and vacuum pump, designed to repair LCD screens up to 12" using adhesive plasters OCA. Device does not require any other components besides connecting to the mains. There is therefore no need to purchase additional compressors and vacuum pumps!

PRODUCT ON STOCK - SHIPING FROM EU/POLAND SO NO CUSTOMS APPLY



Specifications:
- External dimensions: 370 * 390 * 500mm
- Net weight: 55kg
- Gross weight: 65kg (wooden box)
- Supply voltage: 220-240VAC
- Power: 800W
- Regulation of temperature: 0-99C
- The size of the heating plate: 220x220mm (LCD 12 ")


Device TBK-608 has integrated the following modules in one housing:


- Press (lminator) vacuum-pressure
- autoclave
- compressor
- Oil-free vacuum pump


Photos of device:








Advanatges of using TBK 608:
- easy to handle and operate - only 1 button to press for whole operation
- automatic in/out
- automatic lock system
- automatic exhaust
- anti heat pipe design

Laminar chamber dust-free DF-1200 are designed for the repair of LCD displays in the dust-free conditions. Air circulation from top to bottom is forced by a fan at the top of the chamber. The fan has multisteps speed control. In addition, the fan in a sealed HEPA fan is placed to ensure clean air at the level of 99.99%. The entire complement antistatic film covering the chamber after three or four sides, depending on the model. This section is intended for your own installation. Dimensions: 120 [W] * 60 [D] * 185 [H] cm









NOTE: Please note that due high volume of those items all courier company use not real weight but volumetric one, that why volumetric weight that courier company uses will be around 260 kg instead real weight at aroudn 50 kg. You can pickup those items by your own courier company without any additional fees from our side.

Set contains:
- complete set of aluminum profiles with connecting elements
- fan
- HEPA filter
- Anti-static film
- connecting scheme all the elements

Product placed on the market in the EU before December 13, 2024: YES

Safety Warnings and Usage Guidelines

Based on the requirements of Regulation (EU) 2023/988 on General Product Safety (GPSR), we present a list of safety warnings. The aim is to protect users from potential hazards resulting from improper use of products/devices.

1. General Safety Measures

* Use the device only in accordance with its intended purpose and the manufacturer's instructions.
* Before first use, read the user manual carefully.

Hazards for children:
* Keep the product/device out of reach of children. Children are unable to assess existing risks.

2. Mechanical Hazards

* Check that all components are properly assembled before operating the device.
* Avoid using tools that may damage the product or contribute to its damage. Do not modify the product: do not open/disassemble it!

3. Electrical Hazards
* Connect only to a socket with the appropriate voltage, in accordance with the manufacturer’s requirements.
* Improper handling of products powered by mains voltage may result in fatal electric shock! If the product and/or the connection cable are damaged, do not touch them; there is a risk of fatal electric shock! Never use the device if the power cord is damaged, frayed, or cut. Avoid touching the power cord or plug with wet hands.
* Product with a separate power supply: before connecting the device to a plug-in or external power supply, ensure that the voltage, polarity (plus/+ and minus/-), and plug dimensions (e.g., inner/outer diameter) match the device.
* Product with a mains plug: the power outlet used for connection must be located near the product and easily accessible. Always unplug the power cord by pulling the plug, not the cable.
* Product with a power cord: the power cable must not be pinched, bent, or damaged by sharp edges. Do not place any objects on the power cord or step on it. The cable should always be arranged carefully to prevent tripping.
* Product intended for soldering: use only appropriate electronic solder and an electronic soldering iron. The soldering process should be performed quickly to avoid overheating and possible damage to the product.

4. Usage Precautions

* Place the product on a stable, flat surface to prevent it from tipping over.
* Always maintain sufficient space around the device (as recommended by the manufacturer) to ensure proper ventilation.
* The operation of certain products (e.g., machines or tools) requires the use of personal protective equipment to minimize health or other risks. This includes, for example, suitable hearing protection, an appropriate respirator/dust mask, or safety goggles, as well as proper gloves, safety footwear, and clothing.

5. Maintenance and Cleaning
* Before performing maintenance or cleaning, read the product’s user manual.
* Improper cleaning agents may not only damage the product but also cause other hazards — follow the manufacturer’s guidelines.

6. User Warnings
* Elderly persons or individuals with limited mobility should exercise particular caution when operating the product and, if necessary, seek assistance from another person.
* If the device operates abnormally (e.g., emits smoke, overheats, or produces unusual sounds), immediately switch it off, disconnect it from power, and contact authorized service.
* Store the product in a dry and cool place to prevent mechanical and electrical damage.

7. Disposal
* All electrical and electronic equipment placed on the European market must be properly disposed of. This means that, at the end of its service life, the device must be disposed of separately from unsorted household waste.

8. Importance of Following the Warnings
Following the above warnings minimizes the risk of personal injury, device malfunction, and material losses. Ignoring these recommendations may lead to serious health and material hazards. Protect yourself and your loved ones by following the indicated safety measures. Detailed warnings or product safety information are available in the user manual supplied with the product or in PDF format on the manufacturer’s/supplier’s website.