4,8 RATING:
Purchase satisfaction
95,0%
Customer service
94,2%
Shop offer
92,9%

Cart

0 products
Main page > Data Analysis and Forensic Tools > JTAG/ISP devices

JTAG/ISP devices

JTAG and ISP service devices enable data recovery from mobile phones as well as their repair. They are used to read and write eMMC / NAND memory using ISP and Direct communication protocols. They have fully functional Fbus and SPI communication modules, thanks to which it is possible to flash the repaired phone without additional devices.

Sort items

Items: 1-17/17 Page: 1/1
Adapter eMMC/JTAG for Riff BOX 2 - RC2000
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(2)

21231

Adapter eMMC/JTAG for Riff BOX 2 - RC2000

Adapter eMMC/JTAG for Riff BOX 2 - RC2000 allows a very simple repair phones by JTAG using IDC20 pin connector known from previous riff but offers also support for eMMC using leatest 30 pin connector (IDC 30 pin). By this you can repair phones with blocked JTAG access (GT-i9300 / N7100 / N719 / N7102, etc.), repair phones with damaged JTAG points/pads (access to ROM2 by EMMC) or read/write EMMC applicable for the data recovery/analysis. Using the adapter you can perform format EMMC or low-format (in case of damage EMMC), CMD42 Lock/Unlock/Pasword reset or Samsung eMMC Factory Format. Our adapter allows you to connect in ISP mode (directly onto your phone without removing the EMMC) or Direct (by removing the BGA soldering and the corresponding memory fields or using adapter).

More info
Price: 10.00 EUR w/o VAT
Easy Z3X Plus LITE (Easy Jtag Plus Box)
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(4)

22020

Easy Z3X Plus LITE (Easy Jtag Plus Box)

Easy Z3X Plus LITE (Easy Jtag Plus Box) is the latest eMMC / JTAG interface of the already well-known Z3x group, whose Multi-COM company is the official representative. The interface created by it is a device that not only serves to repair the bootloader but also has a built-in PinFinder so that we can find the JTAG pinoout in a few seconds. The box also supports the full 8 bit ISP transmission in the latest version. In addition, the Box has a fully functional communication module Fbus and SPI, so it will be possible to flash the repaired phone without additional devices.

Available amount: 2
More info
Price: 349.00 EUR w/o VAT
OctoPlus Pro Box Full (LG+SAM+JTAG+EMMC) 3in1
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(5)

21936

OctoPlus Pro Box Full (LG+SAM+JTAG+EMMC) 3in1

OctoPlus Pro Box Full (LG+SAM+JTAG+EMMC) 3in1 is a phone servicing solution that combines unibox and JTAG interfaces and supports over 530 Samsung, 900 LG and 460 by JTAG mobile devices. It can be used to unlock, flash and recover LG phones, resolve freeze problems and restore IMEI, NVM, camera and network. This box allows to complete support of A2 platform, contains advanced language pack editor as well as complete Softbank support. Box allows you to repair boot in LG 3G-Cyon-Show-FOMA and Anycall phones. OctoPlus Pro is JTAG/EMMC product for professional phone flashing and mobile unlocking tool that lets you work with a wide range of Samsung, Huawei, LG, Motorola, Siemens, Sony Ericsson, Vodafone, ZTE and other mobile devices through JTAG, USB and MMC interfaces.

reseler

Available amount: 5
More info
Price: 399.00 EUR w/o VAT
UFi Box - Worldwide version
Enlarge image

Ask for product

Negotiate price

Calculate currency

Add to store products

(5)

21836

UFi Box - Worldwide version

UFi Box - Worldwide version is the most advanced box for eMMC / eMMCP in Direct / ISP mode. Thanks to the very simple interface, you can repair eMMC devices much simpler that before (resize partition, format, smart test, read and write) and also repair your phones with ADB (HSQUSB 9008) and SPI software (NOR readings).

reseler

Available amount: 1
More info
Price: 309.00 EUR w/o VAT
RIFF Box JTAG/EMMC ORIGINAL
Enlarge image

Ask for product

Calculate currency

Add to store products

7883

RIFF Box JTAG/EMMC ORIGINAL

RIFF Box JTAG/EMMC ORIGINAL it's new device from Rocker Team is finally released on market - now also support EMMC/Direct. There is no other device with so many complex functions supported. As always, Rocker team are presenting something unique and wonderful. It will suit most of regular user needs, although is aimed at advanced developers who need to debug their own embedded code. Unique scripting support, GDB Server for IDA real time debugging, Trace32 scripts compatibility and high quality hardware will be on Your service. Our R&D Team is ready to serve our valued customers as well as our tech support staff.

reseler

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 119.00 EUR w/o VAT
ATF GOLD - Advance Turbo Flasher + ATF Network + JTAG EMMC
Enlarge image

Ask for product

Calculate currency

Add to store products

16520

ATF GOLD - Advance Turbo Flasher + ATF Network + JTAG EMMC

ATF GOLD (Advance Turbo Flasher) + ATF Network and JTAG EMMC activation by Advance Team it's a powerful tool which can flash all Nokia phones including new protocols via Fbus cable in unbelievable speed and stability in compare of any other 3rd party tool which currently present in market. New Protocols Device X3 ,X6 ,E52 ,E55 ,6700 ,etc and all Rapuyama Fbus Flashing. Ofcourse Repair Super dongle key, Repair Sim Lock Dat, UNLOCK are also available. Our version has got preactivated ATF Network support. Activation JTAG EMMC allows to use JTAg Tool with super easy interface and simple and effective repair procedure. Allows to repair all Nokia WP8 Lumia phones with spped up to 480 Mbps USB via ATF Box.

reseler

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 159.00 EUR w/o VAT
ATF Nitro + ATF Network Account Activation
Enlarge image

Ask for product

Calculate currency

Add to store products

8655

ATF Nitro + ATF Network Account Activation

ATF Nitro + ATF Network Account Activation by Advance Team it's a powerful tool which can flash all Nokia phones including new protocols via Fbus cable in unbelievable speed and stability in compare of any other 3rd party tool which currently present in market. New Protocols Device X3 ,X6 ,E52 ,E55 ,6700 ,etc and all Rapuyama Fbus Flashing. Ofcourse Repair Super dongle key, Repair Sim Lock Dat, UNLOCK are also available. In new NITRO edition ATF Network are preactivated on Box

reseler

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 109.00 EUR w/o VAT
Easy Jtag Z3X Plus Ultimate 16in1 (JTAG/eMMC/UFS)
Enlarge image

Ask for product

Calculate currency

Add to store products

(2)

22326

Easy Jtag Z3X Plus Ultimate 16in1 (JTAG/eMMC/UFS)

Easy Jtag Z3X Plus Ultimate 16in1 (JTAG/eMMC/UFS) is a complete device for communication via JTAG, SD (read/write eMMC / eMCP) and MPHY protocol (read/write UFS). The Ultimate version consists of the Easy Z3x Plus interface with a set of 13in1 adapters for reading 99% of eMMC / eMCP systems together with 3in1 adapters for reading UFS (BGA 153, 95 and 254). The interface of the well-known Z3x group - of which Multi-COM is the official representative - not only serves to repair the bootloader but has a built-in PinFinder so that we can find the JTAG pinout in a few seconds. The box also supports the latest version of the full 4-bit ISP transmission and MPHY protocol (read / write UFS memory). In addition, the Box has a fully functional Fbus and SPI communication module, thanks to which it will be possible to flash a repaired phone without additional devices.

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 899.00 EUR w/o VAT
Easy Z3X Plus FULL (Easy Jtag Plus Box)
Enlarge image

Ask for product

Calculate currency

Add to store products

(12)

22031

Easy Z3X Plus FULL (Easy Jtag Plus Box)

Easy Z3X Plus FULL (Easy Jtag Plus Box) is the latest eMMC / JTAG interface of the already well-known Z3x group, whose Multi-COM company is the official representative. The interface created by it is a device that not only serves to repair the bootloader but also has a built-in PinFinder so that we can find the JTAG pinoout in a few seconds. The box also supports the full 8 bit ISP transmission in the latest version. In addition, the Box has a fully functional communication module Fbus and SPI, so it will be possible to flash the repaired phone without additional devices.

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 419.00 EUR w/o VAT
GPG EMMC JTAG Box
Enlarge image

Ask for product

Calculate currency

Add to store products

14305

GPG EMMC JTAG Box

GPG EMMC JTAG Box is a box for repairing dead Android and WP8 phones with EMMC. The supported model range includes Samsung I9300/I9100, HTC G14, Sony, China ZTE/China Huawei/China MTK and thousands of other phones and brands. GPG EMMC support does not depend on the phone model. You can fulfill Read / Write operations with any phones that have a supported EMMC IC.

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 169.00 EUR w/o VAT
GPG EMMC JTAG Box Full + 33 JIG
Enlarge image

Ask for product

Calculate currency

Add to store products

17203

GPG EMMC JTAG Box Full + 33 JIG

GPG EMMC JTAG Box Full + 33 JIG is a box for repairing dead Android and WP8 phones with EMMC. The supported model range includes Samsung I9300/I9100, HTC G14, Sony, China ZTE/China Huawei/China MTK and thousands of other phones and brands. GPG EMMC support does not depend on the phone model. You can fulfill Read / Write operations with any phones that have a supported EMMC IC.

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 199.00 EUR w/o VAT
Medusa Pro Box (JTAG i EMMC)
Enlarge image

Ask for product

Calculate currency

Add to store products

(2)

17275

Medusa Pro Box (JTAG i EMMC)

Medusa Pro Box (JTAG i EMMC) is leatest JTAG/EMMC product for professional phone flashing and mobile unlocking tool that lets you work with a wide range of Samsung, Huawei, LG, Motorola, Siemens, Sony Ericsson, Vodafone, ZTE and other mobile devices through JTAG, USB and MMC interfaces. The main intended purpose of Medusa PRO Box is repairing dead boots of the devices (mobile phones, PDAs, modems, etc.) or these devices recovery, until they become fully operational. Medusa PRO Box Software is a windows application for Medusa PRO Box, provides convenient interface for end user.

reseler

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 159.00 EUR w/o VAT
Medusa PRO Upgrade Kit
Enlarge image

Ask for product

Calculate currency

Add to store products

17332

Medusa PRO Upgrade Kit

Medusa PRO Upgrade Kit is an upgrade kit for the owners of Medusa Box or Octoplus JTAG Box only! Please be aware, the following kit does NOT include smart card and activation. Medusa PRO is leatest JTAG/EMMC product for professional phone flashing and mobile unlocking tool that lets you work with a wide range of Samsung, Huawei, LG, Motorola, Siemens, Sony Ericsson, Vodafone, ZTE and other mobile devices through JTAG, USB and MMC interfaces. The main intended purpose of Medusa PRO Box is repairing dead boots of the devices (mobile phones, PDAs, modems, etc.) or these devices recovery, until they become fully operational. Medusa PRO Box Software is a windows application for Medusa PRO Box, provides convenient interface for end user.

reseler

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 79.00 EUR w/o VAT
MRT AE Tool eMMC Programmer
Enlarge image

Ask for product

Calculate currency

Add to store products

22291

MRT AE Tool eMMC Programmer

MRT AE Tool eMMC Programmer is a high-speed eMMC service solution for OPPO R15, R15X, A5, A7, K1. AE tool allows Flash / Format / Read / Write / Wipe via ISP Pinout. The programmer supports BGA169 / 153, BGA254, BGA221 chips.

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 79.00 EUR w/o VAT
Octoplus JTAG Box
Enlarge image

Ask for product

Calculate currency

Add to store products

17153

Octoplus JTAG Box

Octoplus JTAG Box it's new box of good known team in GSM - producer of SmartClip, Medusa box that allows you to repair boot in LG, Samsung 3G-Cyon-Show-FOMA and Anycall phones. It's a professional JTAG programmer allowing you to work with mobile devices through JTAG interface. The main intended purpose of Medusa JTAG Box is repairing dead boots of the devices (cell phones, PDAs, modems, etc.) or these devices recovery until they become fully operational. After repair you can simply flash phone/device by any flasher...

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 149.00 EUR w/o VAT
ORT JTAG Pro with EMMC Booster
Enlarge image

Ask for product

Calculate currency

Add to store products

21223

ORT JTAG Pro with EMMC Booster

ORT JTAG Pro with EMMC Booster is an advanced JTAG Programmer / Multi-brand JTAG tool, which lets you to work with the wide range of devices with the JTAG interface. The main intended purpose of the ORT JTAG Pro Edition is repairing / recovering dead boot of the devices such as mobile phones, smartphones, modems and other electronic devices, where you can get access to JTAG interface. eMMC Booster Tool allows you to Read / Write (user area) of eMMC Chipsets. eMMC Booster integrates a high-speed microprocessor and a high efficiency hardware engine for the best data transfer performance between USB and eMMC interfaces. Supports mobile phones in-system programming and provides required eMMC voltage.

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 149.00 EUR w/o VAT
RIFF Box 2 - JTAG/EMMC/I2C ORIGINAL
Enlarge image

Ask for product

Calculate currency

Add to store products

(1)

21216

RIFF Box 2 - JTAG/EMMC/I2C ORIGINAL

RIFF Box 2 - JTAG/EMMC/I2C ORIGINAL is the successor of the well-known Riff Box and is used to read and write memory eMMC / NAND using all kinds of communication protocols like eMMC (ISP Direct) / JTAG / I2C / SPI. Box fully supports 4-bit transmissions and allows you to read up to 52 MHz bus width . It is used for reading and recovery electronic devices as well as repair boot in phones / devices.

reseler

Unfortunately, this product is out of stock.

Click here, if you want to be notified by email when product is available

More info
Price: 159.00 EUR w/o VAT