4,7 RATING:
Purchase satisfaction
98,4%
Customer service
98,3%
Shop offer
97,1%

Cart

0 products
Main page > GSM products > Service/Unlock devices > Z3x Box > Easy Jtag Z3X Plus Ultimate 16in1 (JTAG/eMMC/UFS)

Easy Jtag Z3X Plus Ultimate 16in1 (JTAG/eMMC/UFS)

Easy Jtag Z3X Plus Ultimate 16in1 (JTAG/eMMC/UFS)
Price: 569,00 EUR w/o VAT

Quantity

ID: 22326

Product weight: 1.50 kg

Easy Jtag Z3X Plus Ultimate 16in1 (JTAG/eMMC/UFS) to kompletny zestaw dla komunikacji po protokole JTAG, SD (odczyt/zapis układów eMMC/eMCP) oraz MPHY (odczyt/zapis układów UFS). Wersja Ultimate składa się z interfejsu Easy Z3x Plus wraz z kompletem adapterów 13w1 do odczytu 99% układów eMMC/eMCP wraz z adapterami 3w1 do odczytu układów UFS (BGA 153, 95 oraz 254). Sam interfejs dobrze już znanej grupy Z3x - której firma Multi-COM jest oficjalnym przedstawicielem - nie tylko służy do naprawy bootloadera ale posiada wbudowany PinFinder dzięki któremu możemy odnaleźć pinout JTAG w ciągu kilku sekund. Box wspiera tez w najnowszej wersji pełna 4 bitową transmisję ISP oraz protokól MPHY (odczyt/zapis pamięci UFS). Dodatkowo Box posiada w pełni funkcjonalny moduł komunikacyjny Fbus oraz SPI, dzięki czemu możliwe będzie flashowanie naprawionego telefonu bez dodatkowych urządzeń.

YOU CAN ADD ANYTIME Z3X ACTIVATION FOR SAMSUNG , LG OR CHINA TO THIS BOX - YOU CAN ALSO BUY PREACTIVATED BOX FROM OUR STORE TOO WITH ADDITIONAL ONE. ON BOTTOM OF THIS PAGE YOU WILL ALSO FIND ADDITIONAL CABLE SET FOR SAMSUNG AND LG FOR THIS BOX


Main benefits of new Z3x Easy Jtag Plus Box
Updated CPU AT SAM3X8E vs LPC1768 in old box.
Updated FPGA SPARTAN6 vs SPARTAN3 in old box
Updated Power Logic – Full Digital PWM with ADC control.
MicroUSB Connector if additional power required.
VCC and VCCQ overload protection.
Updated host interface: USB 2.0 Device/Mini Host: 480 Mbps
Integrated ISP engine: Z3X High Power Pro Engine
ISP Support 1 and 4 bit connection now **
Added eMMC 8 bit high speed interface up to 48Mhz
Integrated NAND engine: NFC with 4 Kbyte RAM buffer and ECC
Integrated M-PHY interface.
Integrated SPI/I2C engine: up to 65 MHz for HSMCI and SPI clock lines
Integrated Self Test Core that exclude 90% faults in production.
Integrated CCID Card Reader for Z3X Software Use


What you get with new hardware :
Box to Host PC speed increase up to 35MB/sec
JTAG Interface speed increase 20%
eMMC ISP Speed increase up to 4MB/sec
eMMC 8 Bit Speed up to 26MB/sec
Compatibility with 99.9% host PC systems and OSes
Compatibility with old Easy JTAG G1 ISP adapters ( 1bit )
Adapter-less ISP ( all stuff inside the box )
Compatibility with all market popular eMMC sockets ( 8 bit )
True Plug and Play for modern Windows OS ( 8, 8.1 , 10 )
Full Support for legacy OS like Windows XP


Currently supported chipsets and cores for JTAG I/O operations:

 

  • Generic ARM Cores: ARM7, ARM9 (ARM920, ARM926, ARM946), ARM11, CORTEX-A8,CORTEX-A9;
  • Qualcomm QSC Family: QSC1100, QSC1110, QSC6010, QSC6020, QSC6030, QSC6055, QSC6085, QSC6240, QSC6270;
  • Qualcomm MSM Family: MSM6000, MSM6150, MSM6245, MSM6246, MSM6250, MSM6250A, MSM6260, MSM6275, MSM6280, MSM6280A, MSM6281, MSM6800A, MSM6801A, MSM6290, MSM7225, MSM7227, MSM7625, MSM7627, MSM7230, MSM8255, MSM8255T, MSM8260;
  • Qualcomm QSD Family: QSD8250, QSD8650;
  • Marvell/XScale Family: PXA270, PXA271, PXA272, PXA310, PXA312, PXA320.
  • Samsung Processors: S5P6422, S5PV310,S5PC110,S5PC210


    Currently supported memory controllers are:
  • OneNAND Memory> (connected directly to the MCU’s address space);
  • CFI Compliant NOR Memory with CFI Command sets 0×0001, 0×0002, 0×0200 and 0×0003;
  • NAND Controller in MSM6250, MSM6250A;
  • NAND Controller in QSC6055, QSC6085, QSC6240, QSC6270;
  • NAND Controller in MSM6245, MSM6246, MSM6270, MSM6275, MSM6280, MSM6280A, MSM6281, MSM6290, MSM6800A, MSM6801A;
  • NAND Controller and OneNAND Controller in MSM7225, MSM7227, MSM7625, MSM7627;
  • NAND Controller in MSM7200, MSM7200A, MSM7201A, MSM7500, MSM7500A, MSM7501A, MSM7600;
  • NAND Controller in QSD8250, QSD8650;
  • eMMC Controller #2 in MSM7230, MSM8255, MSM8255T;
  • eMMC Controller #0 in S5PC110;
  • eMMC Controller #0 in S5PC210;







    Hardware specification:
  • USB 2.0 High Speed Buffered Interface - we use an native USB Stack. Upstream data are directly arrives to box MCU without getting slowed by bottleneck technologies like Prolific or FTDI chips. CDC Stack are give enough performance to match high load pplications.
  • Native USB CCID Smart Card Reader - Security are very important part of all GSM software project. We use military standart GEMALTO Security for most our software. Box has such card reader avaiable to software in native way. Box are fully capable with previous Z3X box based on FTDI and Alcor logics. It use same card and same software. Its amazing , You can install your existing security card in box and get perfect 3-in-1 magic solution
  • Super Speed Xilinx FPGA Driven Core - Field-programmable gate arrays (FPGAs) are devices that contain programmable logic and interconnects. Incorporating FPGAs into the design of Z3X jtag box ensures that users are able to program or configure boards to erform basic logic gate functions such as AND and/or XOR, as well as, more complex combinational functions such as decoders bus controllers and pinout searching logic.
  • ARM20 Industry Standard JTAG Port - The 20-pin connector is the currently recommended from ARM. You can use different adaptes and jigs , available on market without need soldering or paying for additional converters Connector type: 20-way IDC male eader, 0.1” pitch. Use any 20pin Jtag connectors or jics! Easy and Universal!
  • RJ45 MultiPort UFS3/Unibox Capable - Box are equipped with classical RJ45 Unibox connector. You will be surprised You can plug any type of cables UFS and Unibox. Box will automatically reconfigure power and data lines align. Box are configured as standard unibox after powerup and switch mode after starting corresponding software. Easy and Universal..
  • Integrated ADC and DAC for voltage control - You can flexibly adjust port IO voltage from 1.8 to 3.3 volt. Also box can easy measure internal and external voltage with high precision. Easy and Flexible! You can monitor VFEF line of your device in realtime to be shure that all powering on before connection.
  • Integrated surge and overvoltage protection - Connection errors ? Bad cables ? What else can break high cost equipment or PC motherboard We integrated two level power control and protection subsystem to protect phone, box and your PC You can be shure that even you plug in box ports an spoon everything will be protected from disaster. Easy and Safe!




    Features:
    • ARM7/ARM9/ARM11 PXA3xx, PXA270, Cortex-A8, OMAP850, Cortex-A9 Dual cores support;
    • Multiple devices on JTAG chain are supported, thus TAP number selection is available;
    • Any custom voltage level selection from range ~1.8V to 3.8V
    • TCK/Adaptive clocking selection
    • Halt core (NRST is not changed)
    • Reset core (NRST is applied before halt)
    • Direct Read and Write memory (by 8/16/32-bit mode or bulk transfers)
    • Access to the control registers of ARM core (coprocessor 15)
    • Program code breakpoints
    • Run Halt Restart core
    • 19 Pins Hardware Accselerated unique finder feature offered only by Easy- JTAG



    Set photo








    Complete contains:
    - Easy JTAG Plus Box Main Interface Hardware
    - Z3X Smart Card with Easy JTAG Plus Activation
    - universal eMMC/eMCP adapter for reading BGA: 100, 136, 153, 162, 168, 169, 186, 221, 254, 529
    - universal UFS adapter for reading BGA: 95, 153, 254
    - 5 Piece Adapter Set
    JTAG Pin 20 Standard Cable.
    ISP Soldering connector 1bit.
    ISP Soldering connector 4bit.
    20P to 20P Adapter for E type Socket.
    20P to 20P Adapter for U type Socket.
    - 1 Year Free support access to our file support servers.
    - USB A to B Cable
    - invoice
Product weight: 1.50 kg.
Country:
Courier:
Delivery time: 10-15 working days from shiping date
Shipping cost: 29.32 EUR

NEGOTIATE PRICE

PDF

Additional information about this product:

Information concerning features of this tool :
Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions. Complete list of supported models you can find on the official product page, or on the GSM forum (GSMHosting).

Information concerning technical requiments :
The correct use of the purchased goods is required to have a stable internet connection with min . capacity of 1024 kb / s ( download) and 512 kb / s ( upload) . Before you attempt to make software update on the device or want to activate/use service, make sure that you have a sufficient link parameters .

Information concerning the interoperability of digital content:
For using a software or a piece of software that the manufacturer supplies with purchased hardware, in some cases it’s required that you disable your Firewall ( in software or router) and antivirus software. Leaving it enabled can occurs inproper operation of software / services and you will get communications errors like “Error 10060”.

Information concerning hardware requiments:
For proper working with this device producer suggest PC computer with 32-bit Windows XP operating system. We don't guarantee that software/device will work or any other system - especially 64-bit systems, iMac, Linux.

Information concerning IMEI change:
We want to inform that IMEI change option in softwares are intended to use only to repair broken IMEI and retrieve it to original state. It's prohibitted to use this function to change IMEI to diffrent that original. Multi-COM don't answer to any questions related with operation on IMEI number - if you require help in this metter please contact with software/device producer directly. We don't take any responsibility to use this function.
If you are interested in Easy Jtag Z3X Plus Ultimate 16in1 (JTAG/eMMC/UFS) you will probably want to take a look at following products:

You might also be interested in:

Z3x LG Box + 23 cables Z3x LG Box + 23 cables more
Price:
119.00 EUR w/o VAT
Z3x All-in-One (LG+Samsung PRO+China) + 44 cables Z3x All-in-One (LG+Samsung PRO+China) + 44 cables more
Price:
219.00 EUR w/o VAT
Adapter set NAND Z3x Plus for iPhone / iPad (EasyJTAG NANDKit) Adapter set NAND Z3x Plus for iPhone / iPad (EasyJTAG NANDKit) more
Price:
69.00 EUR w/o VAT
Z3x Samsung PRO Box + 22 cables Z3x Samsung PRO Box + 22 cables more
Price:
129.00 EUR w/o VAT
Z3x LG+Samsung PRO Box +44 cables Z3x LG+Samsung PRO Box +44 cables more
Price:
199.00 EUR w/o VAT
GBKey USB (with PACK1 activation) GBKey USB (with PACK1 activation) more
Price:
89.00 EUR w/o VAT
XPIN Clip full set (CASE) XPIN Clip full set (CASE) more
Price:
689.00 EUR w/o VAT
NSPro with 30 cables set NSPro with 30 cables set more
Price:
109.00 EUR w/o VAT

This product was bought most often with:

Programmer UFS / eMMC / eMCP NuProg-E Programmer UFS / eMMC / eMCP NuProg-E more
Price:
1149.00 EUR w/o VAT

Note

1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.

2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.

3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.