4,8 RATING:
Purchase satisfaction
94,9%
Customer service
94,2%
Shop offer
93,0%

Cart

0 products
Main page > Car Diagnostics // Airbag > VW/AUDI Airbag Reseter

VW/AUDI Airbag Reseter

VW/AUDI Airbag Reseter
Price: 179,00 EUR w/o VAT

Quantity

Available

ID: 2536

Product weight: 0.30 kg

Add to store products

Ask for product

VW/AUDI Airbag Reseter works without additional computer and trough car OBD II connector can erase airbag sensor "crash data" or only fault memory.

Features:

Very simple user instruction: connect this tool to Audi/VW car OBD II connector.Right red button is for airbag "crash data" erase. Push this button once and wait: yellow light start to flash and after 15 second green light inform you that "crash data" is erased.Red light set ON if erasing is not successful. Left yellow button is for erase airbag "fault memory" or "errors". If airbag warning lamp go OFF and immediately ON, evaluate airbag "error memory" using any VW-Audi diagnostic equipment and repair.

Support:

1. Support new Audi airbag sensors(with hc12cpu or CR16 PLCC44) 1999-2002 crash data and DTC65535 (Controller Malfunction) erase, such as:4B0959655G, 4B0959655J,4B0959655C, 8L0959655G, 4D0 959 655 J, 8D0 959 655 J , 8D0 959 655 F, 8D0 959 655 M, etc

2. Support new Airbag sensor (with CR16 80QFP) from VW-Audi (A3, A4, A6, A8 2002-2005, Touareg) crash data and DTC65535 (Controller Malfunction) erase, such as 4B0959655Q ,etc.

3. Support crash data and fault memory erase:
  • AUDI A4, A6, A8 1994-1997: Airbag V BOSCH: 8A0 959 655 C (Bosch 0 285 001 038), 8A0 959 655 K (Bosch 0 285 001 155), 8A0 959 655 K (Bosch 0 285 001 151) - Crash data erase, Fault erase;
  • AUDI A3, A4, A6, A8 bewlow 1999 : Airbag 7 BOSCH - 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L, 8L0 959 655 F - all Bosch Airbag 7 - Crash data erase,Fault erase;
  • Audi A2, A3, A4, A6, A8 - 1999< : Airbag 8 BOSCH - Crash data erase, Fault erase (can't erase "Controller Malfunction" for this moment);
  • VW - Golf III, Passat B4, Sharan - 1J0 909 603 SIEMENS - Crash data erase, Fault erase;
  • VW - Golf IV, Passat B5 - 1J0 909 609, 1J0 909 607 - SIEMENS - Crash data erase, Fault erase;
  • VW - Golf IV, Passat B5 - 3B0 959 655 B, 8L0 959 655 A - all BOSCH - Crash data erase, Fault erase;
  • VW - Golf IV, Passat B5, Sharan - 6Q0 909 605 A, 6Q0 909 605 B - SIEMENS - Crash data erase, Fault erase;
  • VW - Golf IV, Passat B5, Sharan - 1C0 909 605 C, 1C0 909 605 F, 1C0 909 605 H, 6Q0 909 605 C - SIEMENS - Crash data erase, Fault erase;
  • VW - Passat B6 - new SIEMENS - Crash data erase, Fault erase;


    Diagnostic equipment sold by our firm does't have technical support - but that dont't have any influence on guarantees conditions.We do not take responsibility for use this devices.

    Warranty


    We gives 12 months warranty for this product
  • Product weight: 0.30 kg.
    Country:
    Courier:
    Delivery time: 3-7 working days
    Shipping cost: 41.93 EUR

    NEGOTIATE PRICE

    Product placed on the market in the EU before December 13, 2024: YES



    Safety Warnings and Usage Guidelines

    Based on the requirements of Regulation (EU) 2023/988 on General Product Safety (GPSR), we present a list of safety warnings. The aim is to protect users from potential hazards resulting from improper use of products/devices.

    1. General Safety Measures

    * Use the device only in accordance with its intended purpose and the manufacturer's instructions.
    * Before first use, read the user manual carefully.

    Hazards for children:
    * Keep the product/device out of reach of children. Children are unable to assess existing risks.

    2. Mechanical Hazards

    * Check that all components are properly assembled before operating the device.
    * Avoid using tools that may damage the product or contribute to its damage. Do not modify the product: do not open/disassemble it!

    3. Electrical Hazards
    * Connect only to a socket with the appropriate voltage, in accordance with the manufacturer’s requirements.
    * Improper handling of products powered by mains voltage may result in fatal electric shock! If the product and/or the connection cable are damaged, do not touch them; there is a risk of fatal electric shock! Never use the device if the power cord is damaged, frayed, or cut. Avoid touching the power cord or plug with wet hands.
    * Product with a separate power supply: before connecting the device to a plug-in or external power supply, ensure that the voltage, polarity (plus/+ and minus/-), and plug dimensions (e.g., inner/outer diameter) match the device.
    * Product with a mains plug: the power outlet used for connection must be located near the product and easily accessible. Always unplug the power cord by pulling the plug, not the cable.
    * Product with a power cord: the power cable must not be pinched, bent, or damaged by sharp edges. Do not place any objects on the power cord or step on it. The cable should always be arranged carefully to prevent tripping.
    * Product intended for soldering: use only appropriate electronic solder and an electronic soldering iron. The soldering process should be performed quickly to avoid overheating and possible damage to the product.

    4. Usage Precautions

    * Place the product on a stable, flat surface to prevent it from tipping over.
    * Always maintain sufficient space around the device (as recommended by the manufacturer) to ensure proper ventilation.
    * The operation of certain products (e.g., machines or tools) requires the use of personal protective equipment to minimize health or other risks. This includes, for example, suitable hearing protection, an appropriate respirator/dust mask, or safety goggles, as well as proper gloves, safety footwear, and clothing.

    5. Maintenance and Cleaning
    * Before performing maintenance or cleaning, read the product’s user manual.
    * Improper cleaning agents may not only damage the product but also cause other hazards — follow the manufacturer’s guidelines.

    6. User Warnings
    * Elderly persons or individuals with limited mobility should exercise particular caution when operating the product and, if necessary, seek assistance from another person.
    * If the device operates abnormally (e.g., emits smoke, overheats, or produces unusual sounds), immediately switch it off, disconnect it from power, and contact authorized service.
    * Store the product in a dry and cool place to prevent mechanical and electrical damage.

    7. Disposal
    * All electrical and electronic equipment placed on the European market must be properly disposed of. This means that, at the end of its service life, the device must be disposed of separately from unsorted household waste.

    8. Importance of Following the Warnings
    Following the above warnings minimizes the risk of personal injury, device malfunction, and material losses. Ignoring these recommendations may lead to serious health and material hazards. Protect yourself and your loved ones by following the indicated safety measures. Detailed warnings or product safety information are available in the user manual supplied with the product or in PDF format on the manufacturer’s/supplier’s website.

     

    Additional information about this product:

    INFORMATION

    Products offerd on our pages are only interfaces - we don't offer any software for above units. If you need sofware for devices you must purchase them seperatly from prodcuers.

    Information regarding hardware requiments:
    For proper working with this device producer suggest PC computer with 32-bit Windows XP operating system. We don't guarantee that software/device will work or any other system - especially 64-bit systems, iMac, Linux.
    If you are interested in VW/AUDI Airbag Reseter you will probably want to take a look at following products:

    You might also be interested in:

    ELM327 interface + ELM327 interface more
    Price:
    59.00 EUR w/o VAT
    Microprocessor car diagnoscop DM-1 + Microprocessor car diagnoscop DM-1 more
    Price:
    399.00 EUR w/o VAT
    Cable OBD2/OBD1 for Uniscan/EuroscanCable OBD2/OBD1 for Uniscan/Euroscan + Cable OBD2/OBD1 for Uniscan/EuroscanCable OBD2/OBD1 for Uniscan/Euroscan more
    Price:
    10.00 EUR w/o VAT
    Interface ELM327 BLUETOOTH + SDPROG mobile (ANDROID) + Interface ELM327 BLUETOOTH + SDPROG mobile (ANDROID) more
    Price:
    25.00 EUR w/o VAT
    Professional Scan Tools Autel MaxiDiag Elite MD802 Pro + Professional Scan Tools Autel MaxiDiag Elite MD802 Pro more
    Price:
    419.00 EUR w/o VAT
    Mercedes Benz code reader for S&E-class + Mercedes Benz code reader for S&E-class more
    Price:
    49.00 EUR w/o VAT
    SDPROG Smart Driver Program + SDPROG Smart Driver Program more
    Price:
    15.00 EUR w/o VAT
    Adapter HC(9)08 + Adapter HC(9)08 more
    Price:
    20.00 EUR w/o VAT

    Note

    1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.

    2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.

    3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.