 |
JTAG programmers, adapters and devices for communication with mobile phones. UFS / eMMC device programmer designed to read / write and repair data using both the ISP and Direct method. Communication takes place in various JTAG, SD or MPHY protocols. VR-TABLE enables communication, reading and writing of memory via EMMS, JTAG or communication in FBUS mode.
EPIC Plus Programmer
EPIC Plus Programmer is available assembled and tested. Programmer quickly and easily programs the mid-range PICmicros, including the PIC16C55x, 6xx, 7xx, 84, 9xx, PIC16CE62x, PIC16F8xx, PIC14Cxxx, the 8-pin PIC12Cxxx, PIC12CExxx and the 14-pin 16C505 microcontrollers. The basic programmer includes an 18-pin socket for programming 8-, 14- and 18-pin PICmicros. ZIF adapters are available to program 28- and 40-pin as well as surface mount and PLCC packaged PICmicros. (It will not program or read the base-line PIC16C5x or high-end 17Cxxx series.) The EPIC Plus Programmer is software upgradeable for future PICmicros. It includes DOS and Windows 95/98/NT programming software. The programmer runs off two 9-volt batteries or an optional AC adapter (16VDC, 450ma). It plugs into the PC parallel printer port using an optional 25-pin male to 25-pin female parallel printer extension cable.
A 10-pin expansion header on the EPIC Plus Programmer allows in-circuit programming and the connection of a variety of adapters. An additional adapter that you can buy below connect to the EPIC Programmer's 10-pin expansion header to allow programming of 28 and 40 pin PICmicros in DIP. Also additional adapters for programming PLCC and surface mount packages can be buyed in electronic stores or maked by yourself.
Current PICmicro support, EPIC for Windows 95/98/NT:
12C508(A), 12C509(A), 12C671, 12C672, 12CE518, 12CE519, 12CE673, 12CE674: Supported.
14C000: Supported using PIC14C000 ZIF Adapter.
16C505: Supported.
16C52, 16C54, 16C55, 16C56, 16C57, 16C58: Not supported.
16C554(A), 16C556(A), 16C558(A), 16C61, 16C620(A), 16C621(A), 16C622(A), 16C71, 16C710, 16C711, 16C715, 16C84, 16CE623, 16CE624, 16CE625, 16F83, 16F84(A): Supported.
16C62(AB), 16C63(A), 16C64(A), 16C641, 16C642, 16C65(AB), 16C66, 16C661, 16C662, 16C67, 16C72(A), 16C73(AB), 16C74(AB), 16C76, 16C77, 773, 774, 16F873, 16F874, 16F876, 16F877: Supported using 40/28 Pin ZIF Adapter.
16C923, 16C924: Supported using 68 Pin PLCC Adapter.
PicStic1, PicStic2, PicStic3, PicStic4: Supported using PicStic Adapter.
Current PICmicro support, EPIC for DOS:
12C508(A), 12C509(A), 12CE518, 12CE519: Supported.
12C671, 12C672, 12CE673, 12CE674: Not supported.
14C000: Supported using PIC14C000 ZIF Adapter.
16C505, 16C52, 16C54, 16C55, 16C56, 16C57, 16C58: Not supported.
16C554(A), 16C556(A), 16C558(A), 16C61, 16C620(A), 16C621(A), 16C622(A), 16C71, 16C710, 16C711, 16C84, 16CE623, 16CE624, 16CE625, 16F83, 16F84(A): Supported.
16C62(AB), 16C63(A), 16C64(A), 16C65(AB), 16C66, 16C67, 16C72(A), 16C73(AB), 16C74(AB), 16C76, 16C77: Supported using 40/28 Pin ZIF Adapter.
16C641, 16C642, 16C661, 16C662, 16C715, 16C773, 16C774, 16F873, 16F874, 16F876, 16F877: Not supported.
16C923, 16C924: Supported using 68 Pin PLCC Adapter.
Package contains:
EPIC Programmer withtou cover
software available from support area
warranty card
A 10-pin expansion header on the EPIC Plus Programmer allows in-circuit programming and the connection of a variety of adapters. An additional adapter that you can buy below connect to the EPIC Programmer's 10-pin expansion header to allow programming of 28 and 40 pin PICmicros in DIP. Also additional adapters for programming PLCC and surface mount packages can be buyed in electronic stores or maked by yourself.
Current PICmicro support, EPIC for Windows 95/98/NT:
Current PICmicro support, EPIC for DOS:
Package contains:
Warranty
This product has 12 months warranty.
|
||
NEGOTIATE PRICE
Additional information about this product:
Information concerning technical requiments :The correct use of the purchased goods is required to have a stable internet connection with min . capacity of 1024 kb / s ( download) and 512 kb / s ( upload) . Before you attempt to make software update on the device or want to activate/use service, make sure that you have a sufficient link parameters .
Information concerning the interoperability of digital content:
For using a software or a piece of software that the manufacturer supplies with purchased hardware, in some cases it’s required that you disable your Firewall ( in software or router) and antivirus software. Leaving it enabled can occurs inproper operation of software / services and you will get communications errors like “Error 10060”.
.
Information concerning hardware requiments:
For proper working with this device producer suggest PC computer with 32-bit Windows XP operating system. We don't guarantee that software/device will work or any other system - especially 64-bit systems, iMac, Linux.
Information concerning IMEI change:
We want to inform that IMEI change option in softwares are intended to use only to repair broken IMEI and retrieve it to original state. It's prohibitted to use this function to change IMEI to diffrent that original. Multi-COM don't answer to any questions related with operation on IMEI number - if you require help in this metter please contact with software/device producer directly. We don't take any responsibility to use this function.
If you are interested in
EPIC Plus Programmer
you will probably want to take a look at following products:
See also
+
|
GPG HWK Repair Dongle
more
|
Price:
22.00 EUR w/o VAT |
+
|
Adapter for EPIC Programmer
more
|
Price:
12.54 EUR w/o VAT |
This product was bought most often with:
|
+
|
Adapter for EPIC Programmer
more
|
Price:
12.54 EUR w/o VAT |
+
|
PANA G50/X60/X66 v2.0,v3.0
more
|
Price:
4.00 EUR w/o VAT |
+
|
PHI 530 v2.0,v3.0
more
|
Price:
7.23 EUR w/o VAT |
+
|
Pony Programmer 24
more
|
Price:
2.99 EUR w/o VAT |
+
|
AVR Programmer
more
|
Price:
21.04 EUR w/o VAT |
+
|
Cable for Panasonic X70 COM
more
|
Price:
10.00 EUR w/o VAT |
+
|
ERI RJ45 Tornado/Twister
more
|
Price:
5.00 EUR w/o VAT
12.30 EUR
|
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
