|
Main page > Car diagnostics > Radio Code > Sets for Radio > Martech Box III Full Pack (21 activations)
|
 |
Martech Box III Full Pack (21 activations)
Martech Box III Full Pack (21 activations) it's full and complex set for car radios and navigations service inlcudign leatest LCN Nissan, with all 14 activations and JTAG options. Set based on Martech Box III ( STM32 cpu), which supports adequate speed and stability.
Box III supports communication over:
- JTAG (np. LCN, RNS310, LSRNS, HSRNS, HSMCA)
- OBD2 (OBD (K-Line, ALDL, OBD-I, OBD-1.5, OBD-II, EOBD, EoBD2, JOBD, ADR, SAE J1850 PWM, SAE J1850 VPW, ISO 9142-2)
- UART (RS232, TX232, RNS510)
- CAN L, CAN H, K-Line, L-Line, ADC-A, ADC-B
- K-line level 1..15V (without external power supply, just from USB to 9V)
- L-line level 1..15V (without external power supply, just from USB to 9V)
- RS232 TX/RX in -9..+9V range
- RX/TX outputs 1..5V (USB)
- MBUS on TX output
- MBUS na RX output
- on universal outputs
- MAUS BUS (for cancheck in BP radios)
New functions in Programmer bookmark:
- Eeprom / Flash: serial spi, i2c (X24c00 also), microwire (rotated with auto pin finding), 77007MN, KKZ
- NEC (more types, faster connection)
- Motorola (new bootloaders for HC05/11, secured also)
- ST92 (more stable of work, reading secured in future)
- Renesas M16/M32 (possibility to read out some of secured versions)
- JTAG - Box III as a JTAG programmer for many type of ARM 7/9
- no file coding – all can be saved in pure binary file (.mbin file is supported too)
- a possibility of setting Vreg voltage, Rise Time, IREG , reading speed
Box III specifications:
- diagnostic DB25 connector (inputs, outputs, TX232, RX232, CAN L, CAN H, K-Line, L-Line, Vreg, ADC-A, ADC-B)
- USB connector
- 9V external power supply connector
- 4 led diodes (BUSY/ERROR, CONNECTION, RX, TX)
- firmware update on the fly (in background, changes came after software close)
- drivers installations directly from windows update xp/vista/win7/win8/win8.1
- autologin to support Forum Forum
- software, drivers installation can be find on Help online
- 12 months of warranty
- free support on bought activations
What's new in Box III, which is not on Clip so far:
- Nissan LCN / Opel Corsa Touch & Connect (within the activation OMAP5948) original code reading
- full support (read, write, erase) of M35080 3/6/V6/VP/D80/D160 (under the tab of programmer)
- new user interface - easier and faster selection of models, more features
- read / erase / write Serial SPI memories like MX25L160 , W25X32 and F-RAM eg. FM25L04
- RNS 315 original code reading the without the use of expander (procedures work independently without computer control)
- JTAG programmer (in development)
- in many cases, support K / L - Line without external power supply 12V
- K / L support in different voltage ranges from 1 to 15 V (programmable)
- 10 universal I / O lines with programmable logic from 1 to 5 V
- UART and RS232 (separate outputs for RS232 - a standard PC or signal level from -9V ..+ 9V )
- UART in logic from 0 to 15V - max voltage from 1V to 15V
- RS232 with the range of -12V .. +12V
- work on USB power + the ability to work on external power
- possibility to supply external circuits from the box
- Vreg - programmable voltage from 0.5 .. 5V (max voltage dependent on the performance of the computer USB)
- hardware and software support for most protocols OBD ( ALDL , OBD -I, OBD -1.5 , OBD-II , EOBD , EoBD2 , JOBD , ADR , SAE J1850 PWM , SAE J1850 VPW , ISO 9142-2)
- device is fully expandable, on the request of customers also
- programmable current protection outputs, IREG (sum of all outputs IO1 .. I08 + RX + TX)
- analog inputs - ADC-A, ADC-B
Full package consist of:
- Martech BOX III - device
- Activation of RCD Tools for 1 year (after this time renewal is required)
- Activation of RCD PRO Tools for 1 year (after this time renewal is required)
- Activation of Security Repairer for 1 year (after this time renewal is required)
- Activation of Audi Aisin RNSE-PU 2010 for 1 year (after this time renewal is required)
- Activation of Ford TMS 470 Decoder for 1 year (after this time renewal is required)
- Activation of RNS 300 / LowLine Decoder for 1 year (after this time renewal is required)
- Activation of RNS310/HSRNS-Omap Decoder for 1 year (after this time renewal is required)
- Activation of BE2580 System for 1 year (after this time renewal is required)
- Activation of RNS510/810 for 1 year (after this time renewal is required)
- Activation of Emulator for 1 year (after this time renewal is required)
- Activation of Renesas Boot ID/Pass Finder for 1 year (after this time renewal is required)
- Activation of ST10 Flasher for 1 year (after this time renewal is required)
- Activation of Ford CAN code reader for 1 year (after this time renewal is required)
- Activation of Motorola Protect Servica for 1 year (after this time renewal is required)
- Activation of MMI 3G Recovery Tool for 1 year (after this time renewal is required)
- Activation of RNEG Recovery Tool for 1 year (after this time renewal is required)
- Activation of NG4 Recovery Tool for 1 year (after this time renewal is required)
- Activation of Ford V calc for 1 year (after this time renewal is required)
- Activation of VP1/2 Decoder for 1 year (after this time renewal is required)
- Activation of Chrysler SN Decoder for 1 year (after this time renewal is required)
- Activation of NTG Unlocker for 1 year (after this time renewal is required)
- Complet of cables
For this product producer offers 12 months of warranty
Box III supports communication over:
- JTAG (np. LCN, RNS310, LSRNS, HSRNS, HSMCA)
- OBD2 (OBD (K-Line, ALDL, OBD-I, OBD-1.5, OBD-II, EOBD, EoBD2, JOBD, ADR, SAE J1850 PWM, SAE J1850 VPW, ISO 9142-2)
- UART (RS232, TX232, RNS510)
- CAN L, CAN H, K-Line, L-Line, ADC-A, ADC-B
- K-line level 1..15V (without external power supply, just from USB to 9V)
- L-line level 1..15V (without external power supply, just from USB to 9V)
- RS232 TX/RX in -9..+9V range
- RX/TX outputs 1..5V (USB)
- MBUS on TX output
- MBUS na RX output
- on universal outputs
- MAUS BUS (for cancheck in BP radios)
New functions in Programmer bookmark:
- Eeprom / Flash: serial spi, i2c (X24c00 also), microwire (rotated with auto pin finding), 77007MN, KKZ
- NEC (more types, faster connection)
- Motorola (new bootloaders for HC05/11, secured also)
- ST92 (more stable of work, reading secured in future)
- Renesas M16/M32 (possibility to read out some of secured versions)
- JTAG - Box III as a JTAG programmer for many type of ARM 7/9
- no file coding – all can be saved in pure binary file (.mbin file is supported too)
- a possibility of setting Vreg voltage, Rise Time, IREG , reading speed
Box III specifications:
- diagnostic DB25 connector (inputs, outputs, TX232, RX232, CAN L, CAN H, K-Line, L-Line, Vreg, ADC-A, ADC-B)
- USB connector
- 9V external power supply connector
- 4 led diodes (BUSY/ERROR, CONNECTION, RX, TX)
- firmware update on the fly (in background, changes came after software close)
- drivers installations directly from windows update xp/vista/win7/win8/win8.1
- autologin to support Forum Forum
- software, drivers installation can be find on Help online
- 12 months of warranty
- free support on bought activations
What's new in Box III, which is not on Clip so far:
- Nissan LCN / Opel Corsa Touch & Connect (within the activation OMAP5948) original code reading
- full support (read, write, erase) of M35080 3/6/V6/VP/D80/D160 (under the tab of programmer)
- new user interface - easier and faster selection of models, more features
- read / erase / write Serial SPI memories like MX25L160 , W25X32 and F-RAM eg. FM25L04
- RNS 315 original code reading the without the use of expander (procedures work independently without computer control)
- JTAG programmer (in development)
- in many cases, support K / L - Line without external power supply 12V
- K / L support in different voltage ranges from 1 to 15 V (programmable)
- 10 universal I / O lines with programmable logic from 1 to 5 V
- UART and RS232 (separate outputs for RS232 - a standard PC or signal level from -9V ..+ 9V )
- UART in logic from 0 to 15V - max voltage from 1V to 15V
- RS232 with the range of -12V .. +12V
- work on USB power + the ability to work on external power
- possibility to supply external circuits from the box
- Vreg - programmable voltage from 0.5 .. 5V (max voltage dependent on the performance of the computer USB)
- hardware and software support for most protocols OBD ( ALDL , OBD -I, OBD -1.5 , OBD-II , EOBD , EoBD2 , JOBD , ADR , SAE J1850 PWM , SAE J1850 VPW , ISO 9142-2)
- device is fully expandable, on the request of customers also
- programmable current protection outputs, IREG (sum of all outputs IO1 .. I08 + RX + TX)
- analog inputs - ADC-A, ADC-B
Full package consist of:
- Martech BOX III - device
- Activation of RCD Tools for 1 year (after this time renewal is required)
- Activation of RCD PRO Tools for 1 year (after this time renewal is required)
- Activation of Security Repairer for 1 year (after this time renewal is required)
- Activation of Audi Aisin RNSE-PU 2010 for 1 year (after this time renewal is required)
- Activation of Ford TMS 470 Decoder for 1 year (after this time renewal is required)
- Activation of RNS 300 / LowLine Decoder for 1 year (after this time renewal is required)
- Activation of RNS310/HSRNS-Omap Decoder for 1 year (after this time renewal is required)
- Activation of BE2580 System for 1 year (after this time renewal is required)
- Activation of RNS510/810 for 1 year (after this time renewal is required)
- Activation of Emulator for 1 year (after this time renewal is required)
- Activation of Renesas Boot ID/Pass Finder for 1 year (after this time renewal is required)
- Activation of ST10 Flasher for 1 year (after this time renewal is required)
- Activation of Ford CAN code reader for 1 year (after this time renewal is required)
- Activation of Motorola Protect Servica for 1 year (after this time renewal is required)
- Activation of MMI 3G Recovery Tool for 1 year (after this time renewal is required)
- Activation of RNEG Recovery Tool for 1 year (after this time renewal is required)
- Activation of NG4 Recovery Tool for 1 year (after this time renewal is required)
- Activation of Ford V calc for 1 year (after this time renewal is required)
- Activation of VP1/2 Decoder for 1 year (after this time renewal is required)
- Activation of Chrysler SN Decoder for 1 year (after this time renewal is required)
- Activation of NTG Unlocker for 1 year (after this time renewal is required)
- Complet of cables
Warranty
For this product producer offers 12 months of warranty
|
||
NEGOTIATE PRICE
If you are interested in
Martech Box III Full Pack (21 activations)
you will probably want to take a look at following products:
Dedicated devices for this cable
+
|
Renault Tuner List LCD Emulator Cable for Martech BOX III
more
|
Price:
12.00 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original car producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
