Flux AIM NC254 (NO CLEAN)

Flux AIM NC254 (NO CLEAN) is compatible with lead-free SN62 / SN63 and lead-free lead-free SAC305 / SN100C. The flux through its wide process window is used to apply or replace BGA beads, repair electronic circuits and properly wet all soldered surfaces. Solder joints are bright, smooth and shiny. Excellent soldering results can be obtained either in manual soldering using a hot air soldering station, a repair station or a brazing furnace. It is a no-clean flux, has a gel consistency. Contamination that remains on the surface after the brazing process is transparent and has little effect on the appearance of the finished product. The flux can be removed with soap water or a suitable cleaning agent such as IPA. The flux can be applied with a brush, syringe (dispenser), spatula, printed by a sieve.

Temperature profile:
-maximum temperature rise: 2 ° C / sec.
- thermal stabilization and flux activation: 150 ° C - 175 ° C
-the temperature range of flux operation: 155 ° C - 245 ° C

Product placed on the market in the EU before December 13, 2024: YES

Warnings and Safety Guidelines for the Use of Chemical Agents

Based on the requirements of Regulation (EU) 2023/988 on General Product Safety (GPSR), we present a list of safety warnings. The purpose is to protect users from potential hazards resulting from improper use of products/devices/software. The warnings are formulated in a simple and understandable way to ensure accessibility for a wide audience, including elderly people and individuals with mobility limitations.

General Hazards and Precautions

1. Risk of skin, eye, and respiratory irritation
* Avoid direct contact of the agent with the skin – wear protective gloves during use.
* Do not allow the product to come into contact with the eyes – if contact occurs, rinse the eyes immediately with plenty of water and consult a doctor if irritation persists.
* Do not inhale vapors – use the product in well-ventilated areas.

2. Risk of allergic reactions
* Before use, check the list of product ingredients to ensure it does not contain substances to which you are allergic.
* If allergic symptoms occur, such as rash, skin redness, coughing, or difficulty breathing, discontinue use and consult a doctor.

3. Risk of poisoning
* Do not ingest chemical agents or store them in containers resembling food or beverage packaging.
* Keep cleaning agents out of the reach of children and animals to prevent accidental ingestion.
* In case of ingestion, immediately contact a poison control center or a doctor and provide product information from the label.

4. Risk of chemical surface damage
* Before use, test the product on a small, inconspicuous surface to ensure it does not damage the material being treated.
* Use the product according to the manufacturer’s recommendations – do not mix agents together.

5. Risk associated with storage
* Store chemical agents in their original containers with tightly closed lids to prevent accidental spills or leaks.
* Do not store products near heat sources, open flames, or direct sunlight.
* Avoid storing products in humid environments, which may affect their durability and properties.

6. Risk of improper use
* Use chemical agents only as intended – do not use products on surfaces or materials for which they are not recommended.
* Do not dilute the product unless explicitly indicated on the label.

7. Risk of leakage and packaging damage
* Regularly inspect the packaging for leaks or damage – if necessary, transfer the product to a suitable, tightly sealed container labeled properly.
* Do not store agents near food products or kitchen utensils.

8. Environmental risk
* Avoid pouring product residues into drains unless permitted – follow the disposal instructions provided on the packaging.
* Choose biodegradable products to minimize their environmental impact.

Importance of Following Warnings
Adhering to the above warnings minimizes the risk of bodily injury, equipment failure, and material loss. Ignoring these recommendations may lead to serious health and property hazards. Ensure your safety and that of others by following the indicated precautions. Detailed warnings or safety information about the product can be found in the user manual included with the product or available as a PDF on the manufacturer’s/supplier’s website.