|
Main page > Repair Equipment > Soldering Equipment > Smoke Absorbers > Fume Extractor F6001D Waterun digital smoke absorber two-zone
|
 |
Fume Extractor F6001D Waterun digital smoke absorber two-zone
Fume Extractor F6001D Waterun digital smoke absorber two-zone is a great way to clean the air from toxic substances generated, for example, during soldering, which pose a risk to the health of users. The model is the right tool for use in all electronics workshops, services and DIY. The equipment removes contamination from two stations at the same time, and at the same time has a built-in sensor informing about the need to replace the filter and the lack of patency of the suction pipes.
The most important features:
- compact structure, simple installation, high mobility without the need to connect additional installations of suction pipes and vapors extraction systems
- low noise <55dB
- the ability to control the device with a wireless remote control
- a powerful fan with a brushless motor generates a correspondingly large air flow
- triple filtering system - removes harmful substances from vapors to provide adequate protection for the operator
- pre-filter and intermediate filter can be replaced separately, which extends main filter life and reduces operating costs
- a cyclic filtration system prevents cold / hot air from blowing out
- wide range of absorption arms and nozzles
- a flexible suction tube that allows for any maneuvering without the need for additional connectors
- speed control every 10% makes it possible to adjust the suction power of the absorber to a given application
- LCD display showing programmed filter operation time (timer)
- audible alarm for exceeding the working time
- alarm for lack of obstruction of the suction lines
- alarm informing about the need to replace the main filter
The modern fume extractor has a versatile effect. It safely absorbs fumes, vapors or gases harmful to the operator, ensuring a low level of hazardous substances.
The Waterun F6002D fume absorber has a three-stage cleaning system: preliminary, HEPA and the main active carbon - quickly and precisely removes poisonous substances from the air. High-class filters are characterized by much better efficiency and accuracy in catching fine vapor particles than in the case of using only a carbon filter.
Pre-filter: it pre-filters the air and captures any larger contaminants in the vapors - above 50um. Recommended replacement period every 2 months.
HEPA middle filter: filters the air thoroughly from any impurities. For particles above 0.3 μm, its filtering efficiency reaches 99.97%. Recommended replacement period from 2 to 3 months.
Carbon main filter: absorbs all unwanted and harmful fumes. For particles above 0.3 μm, its filtering efficiency reaches 99.97%. When filtering hazardous gases, its efficiency is above 95%. Recommended replacement period from 3 to 6 months.
The specified replacement period for each filter may be extended or shortened depending on the degree of contamination and the intensity of use.
6001_6002_2.png)
Ease of use is guaranteed by flexible pipes, allowing the convenient movement of the vapor-absorbing nozzles to achieve the best results. The device is easy to install and quickly fits into any workplace. Mobility is due to four rotating wheels (including with a position lock) and a handle, with which you can move and move the soldering fume extractor to any place.
Optionally, you can buy a plug for one of the zones and use only the other.
We offer:
exchangeable filters for the available absorbers
wide selection of pipes and suction nozzles
Features:
- absorbs vapors from two zones simultaneously
- sensor informing about the need to replace filters
- high air flow
- flexible hoses and silicone suction nozzles that adapt to the application
- multi-stage filtration
- built-in time from 1 to 999min
Technical Specifications:
- supply voltage: 230VAC
- power: 210W
- maximum air flow: 310 m3 / h
- air flow: 2x11m / s
- noise level: ≤ 55 dB
- filtering effect: 0.3um 99.97%
- length of the suction pipes: 1.3 m each
- pipe mounting diameter in the absorber: 80mm
- suction tube diameter and length: 75mm
- dimensions: (LxWxH) 42.50 x 24.50 x 45.00 cm
- weight: 18.0 kg
The kit includes:
- fume absorber F6002D 1 pc
- extraction arm 2 pcs
- silicone suction nozzle 2 pcs
- power cord
- remote control
- spare 4 pcs of pre-filters
- English user manual
|
||
NEGOTIATE PRICE
If you are interested in
Fume Extractor F6001D Waterun digital smoke absorber two-zone
you will probably want to take a look at following products:
You might also be interested in:
+
|
Transparent nozzle for Waterun Fumego SE-80 and SE-180 fume extractors
more
|
Price:
17.00 EUR w/o VAT |
+
|
Quick 6101 Fume Extractor
more
|
Price:
493.00 EUR w/o VAT |
+
|
Pre-filter for Waterun Fumego Solder F800 fume absorber
more
|
Price:
6.00 EUR w/o VAT |
+
|
Rectangular silicone nozzle for fume extractors F6001D, F6002D
more
|
Price:
21.00 EUR w/o VAT |
+
|
Aoyue 486 Smoke Absorber
more
|
Price:
30.00 EUR w/o VAT |
+
|
Main filter for the fume absorber 3w1- Waterun Fumego SE-80
more
|
Price:
55.00 EUR w/o VAT |
+
|
Central filter for the QUICK 6101/6102 fume extractor KFMS-6100
more
|
Price:
65.00 EUR w/o VAT |
+
|
ZD-153A Soldering Smoke Extractor
more
|
Price:
58.00 EUR w/o VAT |
This product was bought most often with:
+
|
Central filter for fume extractor - WATERUN F6001D, F6002D
more
|
Price:
46.00 EUR w/o VAT |
6001_6002_small.png)
+
|
Carbon main filter for fume extractor WATERUN F6001D / F6002D
more
|
Price:
61.00 EUR w/o VAT |
+
|
Microscope ST8050T-STL6
more
|
Price:
863.00 EUR w/o VAT |
+
|
Microscope LUKE 14MP HDMI Camera
more
|
Price:
199.00 EUR w/o VAT |
+
|
Barlow Squid Delta Adapter (0.5X / 220MM) for 8050 series
more
|
Price:
80.00 EUR w/o VAT |
+
|
Adapter / Converter C-Mount M1/2 CTV (0.5X) for 8050 series
more
|
Price:
74.00 EUR w/o VAT |
+
|
Back light LED-60T ring lamp
more
|
Price:
96.00 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
