Set of 40 MR monolithic adapters for microSD, SD, UFD

Set of 40 MR monolithic adapters for microSD, SD, UFD is a complete set consisting of 38 adapters, including 16 MicroSD adapters, 13 SD adapters, and 11 UFD adapters. MR adapters allows reading of demaged microSD, SD, UFD cards with different  pitch/raster using NAND protocol without any soldering. MR series adapters are compatible with devices such as Visual NAND Reconstructor VNR (Rusolut), Flash Extractor (Soft Center) and PC3000 Flash (Ace Laboratory). The adapter replaces the need for any soldering to the card for reading and, thanks to unique solutions, it also enables quick XOR extraction or analysis and configuration of other pinouts than originally provided with the adapter using a logic analyzer. Use of the adapter minimizes the risk of card damage by soldering (ie pad breaking) and faster readings using various NAND programmers.

Specification:
- made from solid monolith block of TecaFORM-H made in Germany and brushed aluminum for durability.
- printed circuit made with the highest precision of 4mils and gold plated pads to minimize interference
- specially developed PCB tracks routing technology to prevent interference during NAND reading
- special high quality pogo contact pins used which are used for specialized laboratory tests
- ready to work on standard pinout of supported raster cards
- built-in additional noise filters and VSP pins (where available) to prevent "noise" during NAND readings
- MR adapter can be connected to the SD card reader for faster XOR analysis and extraction (look move below)
- MR adapter can be connected to any LA (Logic Analyzer) to analyze signals and find custom pinouts without need of soldering

Compatible with devices of world leaders in data recovery:
- Visual NAND Reconstructor (VNR) - Rusolut
- PC3000 Flash (Ace Laboratory)
- Flash Extractor (Soft Center)

Models list MicroSD:

- Adapter NAND MicroSD MR20
- Adapter NAND MicroSD MR21 V2
- Adapter NAND MicroSD MR22
- Adapter NAND MicroSD MR24
- Adapter NAND MicroSD MR28
- Adapter NAND MicroSD MR30
- Adapter NAND MicroSD MR60
- Adapter NAND MicroSD MR MP08
- Adapter NAND MicroSD MR MP09
- Adapter NAND MicroSD MR MP10X2
- Adapter NAND MicroSD MR MP11
- Adapter NAND MicroSD MR MP12
- Adapter NAND MicroSD MRV-01
- Adapter NAND MicroSD MRV-02
- Adapter NAND MicroSD MRV-03
- Adapter NAND MicroSD MRV-04

Models list SD:

- Adapter NAND SD MR29
- Adapter NAND SD MR35
- Adapter NAND SD MR39
- Adapter NAND SD MR40
- Adapter NAND SD MR42
- Adapter NAND SD MR23
- Adapter NAND SD MR26
- Adapter NAND SD MR43
- Adapter NAND SD SP09
- Adapter NAND SD SP10
- Adapter NAND SD SP11
- Adapter NAND SD SP12
- Adapter NAND SD SP13

Models list UFD:

- Adapter NAND UFD MR19
- Adapter NAND UFD MR25
- Adapter NAND UFD MR36 V2
- Adapter NAND UFD MR27
- Adapter NAND UFD MR UP05
- Adapter NAND UFD MR UP06
- Adapter NAND UFD MR UP07
- Adapter NAND UFD MR UP08
- Adapter NAND UFD MR UP09
- Adapter NAND UFD MR UP10
- Adapter NAND UFD MR UP11

An example of a mounted MR adapter (example MR24) on a PC3000 Flash


Example of mounted MR adapter (on MR24 example) in VNR device


An example of a mounted MR adapter (example MR24) on a Flash Extractor

Complete set includes:
- 36 adapters for monolithic microSD, SD, and UFD cards
- 3 connection adapters for VNR, PC3000, and FE
- 1 microSD to SD connection adapter
- 1 UNI connection adapter for soldering microSD cards (enables connection to various devices)
- 1 set of connection cables
- User manual
- Warranty card

Case dimensions: 43cm x 58cm x 24cm
Weight: 12kg

Note:
Full communication over the MMC / SPI protocol using the SD Adapter is not guaranteed, the SD connector is used to initialize the memory for analyze the signals on the NAND pads. The memory may or may not be detected correctly in Windows.

Warranty

On the adapter we give 36 months of warranty.

Distributor:

Multi-COM Sp. z o.o., ul. Krzaklewskiego 31b, 36-100 Kolbuszowa, e-mail: biuro@multi-com.pl, tel. +48172270025

Safety Warnings and Usage Guidelines

Based on the requirements of Regulation (EU) 2023/988 on General Product Safety (GPSR), we present a list of safety warnings. The aim is to protect users from potential hazards resulting from improper use of products/devices.

1. General Safety Measures

* Use the device only in accordance with its intended purpose and the manufacturer's instructions.
* Before first use, read the user manual carefully.

Hazards for children:
* Keep the product/device out of reach of children. Children are unable to assess existing risks.

2. Mechanical Hazards

* Check that all components are properly assembled before operating the device.
* Avoid using tools that may damage the product or contribute to its damage. Do not modify the product: do not open/disassemble it!

3. Electrical Hazards
* Connect only to a socket with the appropriate voltage, in accordance with the manufacturer’s requirements.
* Improper handling of products powered by mains voltage may result in fatal electric shock! If the product and/or the connection cable are damaged, do not touch them; there is a risk of fatal electric shock! Never use the device if the power cord is damaged, frayed, or cut. Avoid touching the power cord or plug with wet hands.
* Product with a separate power supply: before connecting the device to a plug-in or external power supply, ensure that the voltage, polarity (plus/+ and minus/-), and plug dimensions (e.g., inner/outer diameter) match the device.
* Product with a mains plug: the power outlet used for connection must be located near the product and easily accessible. Always unplug the power cord by pulling the plug, not the cable.
* Product with a power cord: the power cable must not be pinched, bent, or damaged by sharp edges. Do not place any objects on the power cord or step on it. The cable should always be arranged carefully to prevent tripping.
* Product intended for soldering: use only appropriate electronic solder and an electronic soldering iron. The soldering process should be performed quickly to avoid overheating and possible damage to the product.

4. Usage Precautions

* Place the product on a stable, flat surface to prevent it from tipping over.
* Always maintain sufficient space around the device (as recommended by the manufacturer) to ensure proper ventilation.
* The operation of certain products (e.g., machines or tools) requires the use of personal protective equipment to minimize health or other risks. This includes, for example, suitable hearing protection, an appropriate respirator/dust mask, or safety goggles, as well as proper gloves, safety footwear, and clothing.

5. Maintenance and Cleaning
* Before performing maintenance or cleaning, read the product’s user manual.
* Improper cleaning agents may not only damage the product but also cause other hazards — follow the manufacturer’s guidelines.

6. User Warnings
* Elderly persons or individuals with limited mobility should exercise particular caution when operating the product and, if necessary, seek assistance from another person.
* If the device operates abnormally (e.g., emits smoke, overheats, or produces unusual sounds), immediately switch it off, disconnect it from power, and contact authorized service.
* Store the product in a dry and cool place to prevent mechanical and electrical damage.

7. Disposal
* All electrical and electronic equipment placed on the European market must be properly disposed of. This means that, at the end of its service life, the device must be disposed of separately from unsorted household waste.

8. Importance of Following the Warnings
Following the above warnings minimizes the risk of personal injury, device malfunction, and material losses. Ignoring these recommendations may lead to serious health and material hazards. Protect yourself and your loved ones by following the indicated safety measures. Detailed warnings or product safety information are available in the user manual supplied with the product or in PDF format on the manufacturer’s/supplier’s website.