|
Main page > Repair Equipment > Soldering Equipment > BGA Rework stations > Techot TH-395 Soldering Station
|
 |
Techot TH-395 Soldering Station
Techot TH-395 Soldering Station is a professional soldering station designed to replace BGA chip on PCB boards requiring high power heating. Suitable for use with both leaded or lead free tin. Thanks to the programmable profiles and high quality heating elements we have precise control over the process of soldering and thus the effectiveness of the repair. High power output makes the TH-395 is the perfect tool for electronic services specializing in the repair of laptops and consoles.
Features:
- Choosing precision materials (temperature sensor, controller, heater) for precise control of soldering / resoldering BGA components
- Heat output 3.2 kW provides that the device can handle even the largest BGA chips
- Upper heater (hot air) and lower (infrared) run independently and be able to set 8 rising temperature ranges and 8 fixed. The device can store 10 groups of temperature profiles at the same time
- The device can be connected to a PC via a COM port, allowing control via the included software
- Adjust the upper heater in three dimensions guarantees a perfect adjustable of position the airflow over the solder element
- Specially designed magnetic nozzles are immediately mounted give the ability to set any angle. They have been equipped with special drainage holes which is air does not blow out the elements in around of the solder
- Thermocouple with high sensitivity provides accurate temperature measurement on both sides of the PCB. Additional sensor provides control actual temperature during comunication with PC.
- Both the heating zone (upper and lower) can be controlled independently.
- Installed fan protects the PCB from overheating and deformation during soldering. After the process cooling PCB
- The device signals the end of the soldering process / resoldering. Vacuum tweezer allows easy removal of the BGA
- Installation of board is done using a specially carved rails or brackets for boards with irregular shapes
Specification:
Heating power: 3200W (800W top, bottom 2400W)
Power Supply: 220V/230V 50/60Hz
Device dimensions: 470×490×600mm
Positioning PCB: V gouge for positioning the PCB, additional elements to work with plates of irregular shape
PCB dimensions, max 400x350mm , min 20x20mm
Adjustable air flow: three dimensional XYZ
Temperature control, thermocouple - K sensor, high precision measurement is made from either side of the plate to an accuracy of 3 degrees Celsius
Net Weight: 25kg
Set contains:
- Station TH-390
- Three nozzles 31x31, 38x38 and 41x41mm
- 6 additional mounting boards of irregular shapes
- 4 pin supporting board
- Brush
- PC communication cable
- CD with software
- Instructions for Polish and English
- Warranty soldering stations TH-390 for 24 months, warranty covers also heating elements!
Features:
- Choosing precision materials (temperature sensor, controller, heater) for precise control of soldering / resoldering BGA components
- Heat output 3.2 kW provides that the device can handle even the largest BGA chips
- Upper heater (hot air) and lower (infrared) run independently and be able to set 8 rising temperature ranges and 8 fixed. The device can store 10 groups of temperature profiles at the same time
- The device can be connected to a PC via a COM port, allowing control via the included software
- Adjust the upper heater in three dimensions guarantees a perfect adjustable of position the airflow over the solder element
- Specially designed magnetic nozzles are immediately mounted give the ability to set any angle. They have been equipped with special drainage holes which is air does not blow out the elements in around of the solder
- Thermocouple with high sensitivity provides accurate temperature measurement on both sides of the PCB. Additional sensor provides control actual temperature during comunication with PC.
- Both the heating zone (upper and lower) can be controlled independently.
- Installed fan protects the PCB from overheating and deformation during soldering. After the process cooling PCB
- The device signals the end of the soldering process / resoldering. Vacuum tweezer allows easy removal of the BGA
- Installation of board is done using a specially carved rails or brackets for boards with irregular shapes
Specification:
Heating power: 3200W (800W top, bottom 2400W)
Power Supply: 220V/230V 50/60Hz
Device dimensions: 470×490×600mm
Positioning PCB: V gouge for positioning the PCB, additional elements to work with plates of irregular shape
PCB dimensions, max 400x350mm , min 20x20mm
Adjustable air flow: three dimensional XYZ
Temperature control, thermocouple - K sensor, high precision measurement is made from either side of the plate to an accuracy of 3 degrees Celsius
Net Weight: 25kg
Set contains:
- Station TH-390
- Three nozzles 31x31, 38x38 and 41x41mm
- 6 additional mounting boards of irregular shapes
- 4 pin supporting board
- Brush
- PC communication cable
- CD with software
- Instructions for Polish and English
- Warranty soldering stations TH-390 for 24 months, warranty covers also heating elements!
|
||
NEGOTIATE PRICE
If you are interested in
Techot TH-395 Soldering Station
you will probably want to take a look at following products:
You might also be interested in:
+
|
Soldering station BGA WISDOMSHOW WDS-550 5,1kW LCD 7"
more
|
Price:
2699.00 EUR w/o VAT |
+
|
Soldering Station Jetronix-Eco
more
|
Price:
849.00 EUR w/o VAT |
+
|
Stacja lutownicza BGA TouchBGA GM490 4,3kW CCD LCD 17"
more
|
Price:
1999.00 EUR w/o VAT |
+
|
Scotle station IR PRO SC v4 BGA 2,8kW USB
more
|
Price:
1099.00 EUR w/o VAT |
+
|
Jovy RE 7550 BGA Infrared Soldering Station
more
|
Price:
1299.00 EUR w/o VAT |
+
|
WISDOMSHOW WDS-580 BGA Rework Station 4,7kW LCD 7 "
more
|
Price:
1899.00 EUR w/o VAT |
+
|
BGA Techot TH-W430 2x Hot Air Soldering Station
more
|
Price:
999.00 EUR w/o VAT |
+
|
Soldering station BGA TouchBGA GM490 5,45kW LCD 7"
more
|
Price:
1849.00 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
