|
Main page > Repair Equipment > Soldering Equipment > BGA Rework stations > BGA Station Achi IR12000 3,65kW 2xIR + HA
|
 |
BGA Station Achi IR12000 3,65kW 2xIR + HA
BGA Station Achi IR12000 3,65kW 2xIR + HA is an ideal solution for small and medium-sized electronic services. High power, precise control and universal table will allow for the exchange of components from very small size to large BGA solder technology leaded and unleaded.
Specifications:
Type: soldering station
Model: IR12000
producer: ACHI
Power: 3650W
first zone - top: 400W IR
stefa the second - down; 800W Hot Air
the third zone - down; 2400W IR
Power supply: AC220V & # 177; 10 50 / 60Hz
the dimensions of the heater; 350mm x 210mm
control: touch screen 7 "
Advantages:
- 3 heating zones (IR, IR + hotair down)
- Control via touch panel
- High power sufficient exchange BGA components on most motherboards
Description:
- Achi IR12000 station is controlled using a touch panel having a diameter of 7 " to control temperature measurement by the use of a closed loop together with the PLC to ensure precise control of the accuracy 2 ° C.
- Heating was divided into three separately controlled zones for each of them can be set to 8 sections temperature
the first zone - up - IR heater German company ELSTEIN RFS / 80 400W
the second zone - down - blowing hot air in the center of the heater power of 800W
the third zone - down - IR heater with dimensions of 350 x 210 mm
- The machine memory can unlimited numbers of soldering profiles
- To control the process sation uses three temperature sensors (one for each of the heating zones)
- Lower hot air nozzle which is magnetically attached can be freely rotated through 360 °
- Before the end of the profile station beeps about 5-10s before the end, and after its completion will be automatically starts cooling profile
- The software allows to stop the performance profile, the function is useful when preheating plates, adhesive remover, etc.
- holder is fully adjustable, you can move the whole table, left or right handle. Handles have a groove for mounting plates with regular shapes besides, the set includes 6 brackets to the plates of irregular shapes that can be mounted on the brackets (3 per side). Handles can move freely across the width of the table, rotated in and out to the desired distance.
- The station is equipped with an emergency switch located on the front panel immediately shut off the voltage on the heating elements.
Specifications:
Type: soldering station
Model: IR12000
producer: ACHI
Power: 3650W
first zone - top: 400W IR
stefa the second - down; 800W Hot Air
the third zone - down; 2400W IR
Power supply: AC220V & # 177; 10 50 / 60Hz
the dimensions of the heater; 350mm x 210mm
control: touch screen 7 "
Advantages:
- 3 heating zones (IR, IR + hotair down)
- Control via touch panel
- High power sufficient exchange BGA components on most motherboards
Description:
- Achi IR12000 station is controlled using a touch panel having a diameter of 7 " to control temperature measurement by the use of a closed loop together with the PLC to ensure precise control of the accuracy 2 ° C.
- Heating was divided into three separately controlled zones for each of them can be set to 8 sections temperature
the first zone - up - IR heater German company ELSTEIN RFS / 80 400W
the second zone - down - blowing hot air in the center of the heater power of 800W
the third zone - down - IR heater with dimensions of 350 x 210 mm
- The machine memory can unlimited numbers of soldering profiles
- To control the process sation uses three temperature sensors (one for each of the heating zones)
- Lower hot air nozzle which is magnetically attached can be freely rotated through 360 °
- Before the end of the profile station beeps about 5-10s before the end, and after its completion will be automatically starts cooling profile
- The software allows to stop the performance profile, the function is useful when preheating plates, adhesive remover, etc.
- holder is fully adjustable, you can move the whole table, left or right handle. Handles have a groove for mounting plates with regular shapes besides, the set includes 6 brackets to the plates of irregular shapes that can be mounted on the brackets (3 per side). Handles can move freely across the width of the table, rotated in and out to the desired distance.
- The station is equipped with an emergency switch located on the front panel immediately shut off the voltage on the heating elements.
|
||
NEGOTIATE PRICE
If you are interested in
BGA Station Achi IR12000 3,65kW 2xIR + HA
you will probably want to take a look at following products:
You might also be interested in:
+
|
Tornado Infra held station
more
|
Price:
259.00 EUR w/o VAT |
+
|
Infrared Soldering Station Aoyue int720
more
|
Price:
1199.00 EUR w/o VAT |
+
|
Techot TH-395 Soldering Station
more
|
Price:
749.00 EUR w/o VAT |
+
|
Stacja lutownicza BGA TouchBGA GM490 4,3kW CCD LCD 17"
more
|
Price:
1999.00 EUR w/o VAT |
+
|
BGA Techot TH-W430 2x Hot Air Soldering Station
more
|
Price:
999.00 EUR w/o VAT |
+
|
Tornado Infra PRO held station
more
|
Price:
319.00 EUR w/o VAT |
+
|
Professional BGA Rework Station Dinghua DH-200 2300W
more
|
Price:
999.00 EUR w/o VAT |
+
|
Techot TH-550 Soldering Station
more
|
Price:
999.00 EUR w/o VAT |
This product was bought most often with:
+
|
Aoyue 486 Smoke Absorber
more
|
Price:
30.00 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
