LCD automatic press (vacuum laminator) whith autoclave TBK-508 5in1

LCD automatic press (vacuum laminator) whith autoclave TBK-508 5in1 a comprehensive device for repairing damaged LCD displays using the OCA adhesive method. This multifunctional device has the functions of 5 different devices in one: OCA laminator, LCD laminator, laminator for flat-screen telephones and LCD autoclave and built-in vacuum pump with compressor. It is used for complex application of OCA glue on a new glass, thermally combines a new glass with a display, removes air bubbles / blisters that can be formed during the whole process.

• Product features:
  - built-in vacuum pump,
  - compressor (no need to buy additional pumps and compressors!),
  - the built-in laminator is designed for initial thermal (about 40-50C) connecting the LCD display with the glass of the phone with the use of OCA adhesive plasters. The whole process consists in pressing both connected elements with a heated pressure press under pressure of 3-5kg / cm2 under vacuum conditions (-94 ... -98kPa),
  - built-in autoclave is designed for final thermal pressure gluing of the LCD screen and a fast phone with the use of OCA adhesive plasters in the form of solid and air bubbles removal,
  - the device has a set of forms: S7 EDGE, S8, S8+, S9, S9+, S10, S10+, NOTE8, NOTE 9, iPHONE X intended for applying OCA adhesive on the display (it replaces the OCA laminator),
  - forms for laminating curved screens in a laminator with simultaneous pressing of corners,
  lamination of telephones with flat displays up to 7.1 "no additional form is required, just put a rubber or polyurethane undercoat (minimum thickness 1cm) on the lower basic flat form and a display with or without a frame. The device has a flat top press and flat substrate hence also works as a classic laminator,
  - there is no need to have a separate laminator for applying OCA patches on curved glass, because TBK-508 replaces it: in one of the stages of the LCD screen repair process.
   
• Technical data:
  - external dimensions: 49 [szer] x48 [depth] x34 [height] cm
  - net weight: 49 kg
  - supply voltage: 220-240 VAC
  - power: 800 W
  - adjustment of press force on the LCD: yes 0-10 kg / cm2
  - information about the pressure force: yes in kg / cm2
  - limiting the final pressure on the LCD: yes, springs
  - temperature regulation: 0-100 C
  - autoclave depth: 27.5 cm
  - autoclave diameter: 10.8 cm
  - dimensions of the laminar chamber: 11.5x8.8 cm
  - surface dimension of the bottom form for laminating flat screens: 8.5x16 cm (7.1 ")
  - depth of the laminar chamber: 19 cm

• Kit contents:
  - vacuum-pressure laminator with TBK-508 autoclave
  - OCA and LCD lamination kit for S7 EDGE, S8, S8+, S9, S9+, S10, S10+, NOTE8, NOTE 9, iPHONE X
  - user manual
  - original wooden chest

Product placed on the market in the EU before December 13, 2024: YES

Safety Warnings and Usage Guidelines

Based on the requirements of Regulation (EU) 2023/988 on General Product Safety (GPSR), we present a list of safety warnings. The aim is to protect users from potential hazards resulting from improper use of products/devices.

1. General Safety Measures

* Use the device only in accordance with its intended purpose and the manufacturer's instructions.
* Before first use, read the user manual carefully.

Hazards for children:
* Keep the product/device out of reach of children. Children are unable to assess existing risks.

2. Mechanical Hazards

* Check that all components are properly assembled before operating the device.
* Avoid using tools that may damage the product or contribute to its damage. Do not modify the product: do not open/disassemble it!

3. Electrical Hazards
* Connect only to a socket with the appropriate voltage, in accordance with the manufacturer’s requirements.
* Improper handling of products powered by mains voltage may result in fatal electric shock! If the product and/or the connection cable are damaged, do not touch them; there is a risk of fatal electric shock! Never use the device if the power cord is damaged, frayed, or cut. Avoid touching the power cord or plug with wet hands.
* Product with a separate power supply: before connecting the device to a plug-in or external power supply, ensure that the voltage, polarity (plus/+ and minus/-), and plug dimensions (e.g., inner/outer diameter) match the device.
* Product with a mains plug: the power outlet used for connection must be located near the product and easily accessible. Always unplug the power cord by pulling the plug, not the cable.
* Product with a power cord: the power cable must not be pinched, bent, or damaged by sharp edges. Do not place any objects on the power cord or step on it. The cable should always be arranged carefully to prevent tripping.
* Product intended for soldering: use only appropriate electronic solder and an electronic soldering iron. The soldering process should be performed quickly to avoid overheating and possible damage to the product.

4. Usage Precautions

* Place the product on a stable, flat surface to prevent it from tipping over.
* Always maintain sufficient space around the device (as recommended by the manufacturer) to ensure proper ventilation.
* The operation of certain products (e.g., machines or tools) requires the use of personal protective equipment to minimize health or other risks. This includes, for example, suitable hearing protection, an appropriate respirator/dust mask, or safety goggles, as well as proper gloves, safety footwear, and clothing.

5. Maintenance and Cleaning
* Before performing maintenance or cleaning, read the product’s user manual.
* Improper cleaning agents may not only damage the product but also cause other hazards — follow the manufacturer’s guidelines.

6. User Warnings
* Elderly persons or individuals with limited mobility should exercise particular caution when operating the product and, if necessary, seek assistance from another person.
* If the device operates abnormally (e.g., emits smoke, overheats, or produces unusual sounds), immediately switch it off, disconnect it from power, and contact authorized service.
* Store the product in a dry and cool place to prevent mechanical and electrical damage.

7. Disposal
* All electrical and electronic equipment placed on the European market must be properly disposed of. This means that, at the end of its service life, the device must be disposed of separately from unsorted household waste.

8. Importance of Following the Warnings
Following the above warnings minimizes the risk of personal injury, device malfunction, and material losses. Ignoring these recommendations may lead to serious health and material hazards. Protect yourself and your loved ones by following the indicated safety measures. Detailed warnings or product safety information are available in the user manual supplied with the product or in PDF format on the manufacturer’s/supplier’s website.