 |
MC Tool Box
MC Tool Box is the World's first to Read/Write Primary/Secondary EEPROM for Spreadtrum CPUs, rebuild Flash IMEI for MTK CPUs (in Flash Mode) and the first that features EASY(c) auto pinout find for MTK CPUs. MC Tool Box supports almost all China Mobile phones.
Features:
- Supports almost all China Mobile phones (MTK, Spreadtrum, SKY, etc...)
- Read / Write Full Flash (MCU + FFS/NAND + EEPROM)
- Read / Write Firmware Part only (MCU)
- Read / Write EEPROM (NVM)
- Auto calculate of MTK security area after flashing (which called RPL,Decryption,etc..)
- Change Languages (by flashing)
- Auto-find Firmware/EEPROM/FAT area in MTK CPUs.
- Format FFS (FAT) area in all MTK CPUs.
- Repair EEPROM / FAT related problems (like Freezing etc...)
- Clear all type of Locks.
- Rebuild IMEI.
- World's First : Rebuild Flash IMEI for MTK CPUs (in Flash Mode).
- Read phone's information and change product code.
- World's First : Read / Write Primary / Secondary EEPROM for Spreadtrum CPUs.
- Support for USB connection for Spreadtrum CPUs.
- Read / Write data in High Speed (921600bps)
- Possiblity to save/load found pinouts (can make a DataBase).
- World's First : EASY(c) auto pinout find for MTK CPUs (NO NEED TO KEEP POWER BUTTON).
- Control resistance on RX, TX pins.
- Manual define RX, TX, GND, VCC pins.
- Auto scan and set RX, TX, GND, VCC pins with Super Fast speed.
- Auto scan and set pinout define for : MTK, Spreadtrum, SKY, ADI, AGERE, OM6357 (Swift), TI, INFINEON CPUs.
- Auto scan and set VCC & GND pins for ALL type of CPUs.
- Support for all type of China-Mobile connectors.
- Access to support area with more than 30 GB of china mobile phone flash files.
- Direct Access to support Area By click on Go Support Button
Package Contains:
1 x MC Tool Box
14 x cables
IP-L10A+L10B 2 in 1 Cable
IP-L10C+L14C 2 in 1 Cable
IP-L12C+L14A 2in 1 Cable
IP-L13A+L14A 2 in 1 Cable
IP-L14E+L14D 2 in 1 Cable
IP-L15A+L14B 2 in 1 Cable
IP-L18A+L12B 2 in 1 Cable
IP-L12A Cable
IP-L18A Cable
IP-L18B Cable
IP-L20A Cable
IP-L22A Cable
IP-L24A Cable
Nokia N73 China Phone Cable
We offer 6 months of warranty for this product.
Features:
- Supports almost all China Mobile phones (MTK, Spreadtrum, SKY, etc...)
- Read / Write Full Flash (MCU + FFS/NAND + EEPROM)
- Read / Write Firmware Part only (MCU)
- Read / Write EEPROM (NVM)
- Auto calculate of MTK security area after flashing (which called RPL,Decryption,etc..)
- Change Languages (by flashing)
- Auto-find Firmware/EEPROM/FAT area in MTK CPUs.
- Format FFS (FAT) area in all MTK CPUs.
- Repair EEPROM / FAT related problems (like Freezing etc...)
- Clear all type of Locks.
- Rebuild IMEI.
- World's First : Rebuild Flash IMEI for MTK CPUs (in Flash Mode).
- Read phone's information and change product code.
- World's First : Read / Write Primary / Secondary EEPROM for Spreadtrum CPUs.
- Support for USB connection for Spreadtrum CPUs.
- Read / Write data in High Speed (921600bps)
- Possiblity to save/load found pinouts (can make a DataBase).
- World's First : EASY(c) auto pinout find for MTK CPUs (NO NEED TO KEEP POWER BUTTON).
- Control resistance on RX, TX pins.
- Manual define RX, TX, GND, VCC pins.
- Auto scan and set RX, TX, GND, VCC pins with Super Fast speed.
- Auto scan and set pinout define for : MTK, Spreadtrum, SKY, ADI, AGERE, OM6357 (Swift), TI, INFINEON CPUs.
- Auto scan and set VCC & GND pins for ALL type of CPUs.
- Support for all type of China-Mobile connectors.
- Access to support area with more than 30 GB of china mobile phone flash files.
- Direct Access to support Area By click on Go Support Button
Package Contains:
Warranty
We offer 6 months of warranty for this product.
|
||
NEGOTIATE PRICE
Additional information about this product:
Information concerning features of this tool :Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions. Complete list of supported models you can find on the official product page, or on the GSM forum (GSMHosting).
Information concerning technical requiments :
The correct use of the purchased goods is required to have a stable internet connection with min . capacity of 1024 kb / s ( download) and 512 kb / s ( upload) . Before you attempt to make software update on the device or want to activate/use service, make sure that you have a sufficient link parameters .
Information concerning the interoperability of digital content:
For using a software or a piece of software that the manufacturer supplies with purchased hardware, in some cases it’s required that you disable your Firewall ( in software or router) and antivirus software. Leaving it enabled can occurs inproper operation of software / services and you will get communications errors like “Error 10060”.
Information concerning hardware requiments:
For proper working with this device producer suggest PC computer with 32-bit Windows XP operating system. We don't guarantee that software/device will work or any other system - especially 64-bit systems, iMac, Linux.
Information concerning IMEI change:
We want to inform that IMEI change option in softwares are intended to use only to repair broken IMEI and retrieve it to original state. It's prohibitted to use this function to change IMEI to diffrent that original. Multi-COM don't answer to any questions related with operation on IMEI number - if you require help in this metter please contact with software/device producer directly. We don't take any responsibility to use this function.
If you are interested in
MC Tool Box
you will probably want to take a look at following products:
See also
+
|
Pad Finder Box
more
|
Price:
128.00 EUR w/o VAT |
+
|
Infinity Box PinFinder Adapter 2in1
more
|
Price:
99.00 EUR w/o VAT |
+
|
Activation China Editor for Z3x Box
more
|
Price:
18.00 EUR w/o VAT |
This product was bought most often with:
|
+
|
Infinity Box PinFinder Adapter 2in1
more
|
Price:
99.00 EUR w/o VAT |
+
|
Vygis Box with 19 cables
more
|
Price:
35.00 EUR w/o VAT |
+
|
Z3x Samsung PRO Box + 22 cables
more
|
Price:
129.00 EUR w/o VAT |
+
|
Nokia N73 TestPoint RJ45
more
|
Price:
12.00 EUR w/o VAT |
+
|
Activation Vodafone for JAF
more
|
Price:
5.00 EUR w/o VAT |
+
|
Cable for Nokia N96 RJ45 JAF® (5 pin)
more
|
Price:
5.00 EUR w/o VAT |
+
|
Cable for Nokia 2680s RJ45 for JAF® Box (7 pin)
more
|
Price:
5.00 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
