|
Main page > Repair Equipment > Soldering Equipment > BGA Rework system with LCD / Split Vision > BGA station Techot TH-W600 - Split Vision
|
 |
BGA station Techot TH-W600 - Split Vision
BGA station Techot TH-W600 - Split Vision has been designed to work in large electronic services, laboratories or departments prototype. With powerful and versatile mounting system boards can be on it to install or remove BGA and SMD measuring up to 80x80mm with small and large plates. But, what sets this model apart from other machines is split vision positioning system allows precise mount components on the board exactly where.
Specification:
- Total power: 5300W
- Warming up top: Hot air 1200W
- Heating Bottom: Hot air 1200W, the third IR heater 2700W
- Power supply: AC220V & # 177; 10 50 / 60Hz
- Dimensions: 650x630x850 mm
- Mounting PCB:
- Coarse adjustment of the position of the entire table in one axis,
- Pushes handles right and left of the V-mount or three brackets to the site for fixing slabs of irregular shape,
- Two strips with two pins supporting plate on the page, lower the hot air has a large pin supporting plate under the system
a system of three precision knobs for adjusting the position of the plate relative to the system with an accuracy of 0.01mm
- Temperature control: three thermocouple types K working in a closed loop, one for each section, the precision in the range of approximately 3 °
- PCB size:
] Maximum 400 × 390mm
minimum 10x10 mm
- Size BGA
maximum 80x80mm
minimum 2x2mm
- Size podgrzwacza 330 × 250 mm
- Installed modules
module temperature control of high sensitivity
industrial PC with touch screen
servo raising and lowering system
positioning system of the Split Vision
LED backlight
pre-positioning laser
- Net weight 60 kg
Functions:
- The device has a touch panel and microprocessor control of the soldering process. The monitor displays four temperature graphs in real time, giving a preview of the current value.
- Each profile solder has 8 sections temperatures. Excellent temperature control system ensures the effectiveness of soldering.
- The station can store multiple profiles soldering (over 1000). After finishing the process it is possible to analyze the waveform.
- There are three independent heating means surfaces from which a first and a second hot air blower and the third is a quartz heater. . The first and second heating surface can be controlled by a plurality of groups and the temperature parameter section. The top heating element is moved up and down by means of the engines, while giving lower height adjustment knob. A third surface heated plate over a large area and reduced stress by lowering the temperature required for proper solder element.
- Appropriately chosen temperature sensor with high sensitivity K working in a closed loop in order to accurately determine the temperature of the upper and lower.
- Strong transverse fan cool the PCB board automatically after desoldering and soldering, it can prevent the deformation of PCB and secure effect uBGA.
- Handle the motherboard is equipped with a V-groove which ensures fast and stable installation of the panels and a large range of adjustment
- The device is designed to work with large motherboards made in the technology of solder to both lead and lead-free. High power and efficient cooling system provides efficient operation and shorten the impact of high temperature on the plate to a minimum.
- Nozzle hot air can freely rotate 360 ° with easy movement. By using a magnetic nozzle assembly technology.
- The station equipped with split vision system allows precise positioning of the disc using a prism system of cameras and monitor.
- The station has CE, emergency stop as well as double protection against
Complete contains:
- Soldering station TH-W600
- Three nozzles of the upper heater (18x18mm, 38x38mm ,, 44x44mm)
- Lower blower nozzles (50x50 mm)
- Elements of the installation CDs with irregular shapes 6p
- External temperature sensor with a small size
- A set of suction cups for gripping systems
- Manual in Polish and English
Priducer offer warranty for 24 months
Specification:
- Total power: 5300W
- Warming up top: Hot air 1200W
- Heating Bottom: Hot air 1200W, the third IR heater 2700W
- Power supply: AC220V & # 177; 10 50 / 60Hz
- Dimensions: 650x630x850 mm
- Mounting PCB:
- Coarse adjustment of the position of the entire table in one axis,
- Pushes handles right and left of the V-mount or three brackets to the site for fixing slabs of irregular shape,
- Two strips with two pins supporting plate on the page, lower the hot air has a large pin supporting plate under the system
a system of three precision knobs for adjusting the position of the plate relative to the system with an accuracy of 0.01mm
- Temperature control: three thermocouple types K working in a closed loop, one for each section, the precision in the range of approximately 3 °
- PCB size:
] Maximum 400 × 390mm
minimum 10x10 mm
- Size BGA
maximum 80x80mm
minimum 2x2mm
- Size podgrzwacza 330 × 250 mm
- Installed modules
module temperature control of high sensitivity
industrial PC with touch screen
servo raising and lowering system
positioning system of the Split Vision
LED backlight
pre-positioning laser
- Net weight 60 kg
Functions:
- The device has a touch panel and microprocessor control of the soldering process. The monitor displays four temperature graphs in real time, giving a preview of the current value.
- Each profile solder has 8 sections temperatures. Excellent temperature control system ensures the effectiveness of soldering.
- The station can store multiple profiles soldering (over 1000). After finishing the process it is possible to analyze the waveform.
- There are three independent heating means surfaces from which a first and a second hot air blower and the third is a quartz heater. . The first and second heating surface can be controlled by a plurality of groups and the temperature parameter section. The top heating element is moved up and down by means of the engines, while giving lower height adjustment knob. A third surface heated plate over a large area and reduced stress by lowering the temperature required for proper solder element.
- Appropriately chosen temperature sensor with high sensitivity K working in a closed loop in order to accurately determine the temperature of the upper and lower.
- Strong transverse fan cool the PCB board automatically after desoldering and soldering, it can prevent the deformation of PCB and secure effect uBGA.
- Handle the motherboard is equipped with a V-groove which ensures fast and stable installation of the panels and a large range of adjustment
- The device is designed to work with large motherboards made in the technology of solder to both lead and lead-free. High power and efficient cooling system provides efficient operation and shorten the impact of high temperature on the plate to a minimum.
- Nozzle hot air can freely rotate 360 ° with easy movement. By using a magnetic nozzle assembly technology.
- The station equipped with split vision system allows precise positioning of the disc using a prism system of cameras and monitor.
- The station has CE, emergency stop as well as double protection against
Complete contains:
- Soldering station TH-W600
- Three nozzles of the upper heater (18x18mm, 38x38mm ,, 44x44mm)
- Lower blower nozzles (50x50 mm)
- Elements of the installation CDs with irregular shapes 6p
- External temperature sensor with a small size
- A set of suction cups for gripping systems
- Manual in Polish and English
Warranty
Priducer offer warranty for 24 months
|
||
NEGOTIATE PRICE
If you are interested in
BGA station Techot TH-W600 - Split Vision
you will probably want to take a look at following products:
You might also be interested in:
+
|
WDS650 2xHR + 6500W quartz BGA rework station
more
|
Price:
6495.00 EUR w/o VAT |
+
|
Soldering station BGA WISDOMSHOW WDS-620 5,3kW LCD 7" Split Vision
more
|
Price:
5071.00 EUR w/o VAT |
+
|
Station Aoyue BGA 9000B
more
|
Price:
6399.00 EUR w/o VAT |
+
|
Aoyue BGA 9000A Soldering system
more
|
Price:
6999.00 EUR w/o VAT |
+
|
Soldering System Aoyue 8011 HOT BAR
more
|
Price:
3299.00 EUR w/o VAT |
+
|
BGA soldering station SEAMARK ZM-R7220A 2x HOTAIR + IR 5300W SPLIT VISION
more
|
Price:
5099.00 EUR w/o VAT |
+
|
Automatic BGA WISDOMSHOW WDS-720 4200W soldering station
more
|
Price:
3659.00 EUR w/o VAT |
+
|
Automatic WISDOMSHOW WDS-750 6800W BGA soldering station
more
|
Price:
12185.00 EUR w/o VAT |
This product was bought most often with:
+
|
9in1 Dismantle Car Audio Pry Open Tool Set
more
|
Price:
15.00 EUR w/o VAT |
+
|
Protection tape JOVY-R0 50m
more
|
Price:
45.00 EUR w/o VAT |
+
|
Reballing Kit Jovy - JV-RMS
more
|
Price:
359.00 EUR w/o VAT |
+
|
BGA phone reballing system JV-RKC Jovy
more
|
Price:
55.00 EUR w/o VAT |
+
|
Leaded soldering ball BGA 0.30mm
more
|
Price:
22.00 EUR w/o VAT |
+
|
Soldering ball BGA 0,4mm
more
|
Price:
6.50 EUR w/o VAT |
+
|
eMMC SCP-6 Platform
more
|
Price:
22.00 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
