USB COM 1.0 TP cable (USB C) for XRY / Oxygen / Chimera

USB COM 1.0 TP cable (USB C) for XRY / Oxygen / Chimera is a special cable that allows the phone to enter the USB COM 1.0 service mode in phones based on Kirin 710 / 710A / 710F, 810/820, 980/985, 990/990 5G systems, which were updated to the latest HarmonyOS / updated to the latest SPL. (eg new P30 PRO, etc.) Without this cable, putting the phone into low-level mode (USB COM 1.0) is not possible and therefore no service operation can be performed.

Processor-based phones supported:
- Kirin 710 / 710A / 710F
- Kirin 810/820
- Kirin 980/985
- Kirin 990/990 5G


What applications does the cable work with?
The cable works with all programs that require USB COM 1.0 mode for operation. The problem in the case of the new versions of the fixes is the inability to put the teleophone into USB COM 1.0 mode - the phone did not respond to the Test Point. By connecting this cable with the Test Point, the phone will switch to USB COM 1.0 mode and you will be able to use the service functions offered by your software. Cable tested on MSAB XRY, Oxygen Forensic Detective, Passware, Chimera Tool, EFT, Sigma Box

How does the cable work?
1. Connect the cable to the phone
2. Connect the TestPoint on the phone with the battery connected
3. Connect the cable to the computer - the phone will enter TP mode *
4. You can now connect a regular USB C cable for service operations

* if, after connecting the cable, Device Manager returns a message about an unknown device, make sure that the cable is connected to the phone first, and then to the computer.
In some cases, rorate 180 degree USB-C plug also helps.