Soldering Equipment - Smoke Absorbers

RELIFE RL-6600 fume and smoke extractor for microscope ? soldering smoke absorber grey The RL-6600 is a compact fume extractor designed for use with microscopes and at service workstations where smoke and oil mist are generated during soldering.

ZD-153A Soldering Smoke Extractor soldering smoke extractor sucks in smoke which is generated during soldering and filters this through a replaceable activated carbon filter.

Activated Carbon Filter for Fume Extractor ? RT750 The fourth air filter in sequence, absorbing all unwanted and harmful fumes.

Central filter for fume extractor - WATERUN F6001D, F6002D it safely absorbs fumes, vapors or harmful gases, ensuring a low level of hazardous substances. HEPA middle filter: thoroughly filters the air from any impurities. For particles above 0.3μm, its filtering efficiency reaches 99.97%. Recommended replacement period from 2 to 3 months. The specified replacement period may be extended or shortened depending on the degree of contamination and the intensity of use.

HEPA Filter for RT750 Fume Extractor The third air filter in sequence, thoroughly filtering out all impurities.

Main filter for the fume absorber 3w1- Waterun Fumego SE-80 safely absorbs fumes, vapors or harmful gases, ensuring low levels of hazardous substances. The filter consists of 3 layers.

Pre-filter for Fume Extractor ? RT750 The second air filter in sequence. It pre-filters the air and captures all larger contaminants present in fumes ? above 50 ?m. Recommended replacement interval: every 2 months.

Pre-filter QUICK 6101/6102 - filtration class EPA E10. Designed for QUICK 6101 and 6102 cooktop extractors.

The main 3-in-1 filter for the WATERUN FUMEGO SOLDER F800 fume absorber safely absorbs fumes, vapors or harmful gases, ensuring low levels of hazardous substances. Carbon main filter: absorbs all unwanted and harmful fumes. For particles above 0.3 μm, its filtering efficiency reaches 99.97%. When filtering hazardous gases, its efficiency is above 95%. Recommended replacement period from 3 to 6 months.

The indicated replacement interval may be extended or shortened depending on the degree of contamination and the intensity of use.

Waterun Fumego Solder F800 table-type smoke absorber with a pipe is a great way to clean the air of toxic substances generated, for example, during soldering, which pose a risk to the health of users. The absorber removes impurities, and at the same time has a three-stage speed control and a 3-in-1 filter with a filtering efficiency of 99.97%. The Waterun Fumego Solder F800 fume absorber has a two-stage cleaning system: primary and main activated carbon - quickly and precisely removing poisonous substances from the air. High-class filters are characterized by much better efficiency and accuracy in catching fine vapor particles than in the case of using only a carbon filter. The modern fume extractor has a versatile effect. It safely absorbs fumes, vapors or gases harmful to the operator, ensuring a low level of hazardous substances.