|
Main page > Repair Equipment > Soldering Equipment > BGA Rework stations > Techot TH-490 Soldering Station
|
 |
Techot TH-490 Soldering Station
Techot TH-490 Soldering Station is a professional soldering station designed to replace BGA chip on PCB boards requiring high power heating. Suitable for use with both leaded or lead free tin. Thanks to the programmable profiles and high quality heating elements we have precise control over the process of soldering and thus the effectiveness of repair. High power output makes the TH-490 is the perfect tool for electronic services specializing in the repair of laptops and consoles.
Features:
- Choosing precision materials (temperature sensor, controller, heater) for precise control of soldering / resoldering BGA components
- It has a replaceable top heating module: hot air or infrared.
- Heat output 3.45 kW provides that the device can handle even the largest BGA chips
- Upper heater (hot air or infrared) and lower (infrared) run independently and be able to set 8 rising temperature ranges and 8 fixed. The device can store 10 groups of temperature profiles at the same time
- The device can be connected to a PC via a COM port, allowing control via the included software
- Adjust the upper heater in three dimensions guarantees a perfect adjustable of position the airflow over the solder element
- Specially designed nozzles are immediately magnetic mounted give the ability to set any angle. They have been equipped with special drainage holes which is air does not blow out the elements in around of the solder
- Thermocouple with high sensitivity provides accurate temperature measurement on both sides of the PCB
- Both the heating zone (upper and lower) can be controlled independently.
- Installed fan protects the PCB from overheating and deformation during soldering. After the process cooling PCB
- The device signals the end of the soldering process / resoldering.
- Installation of board is done using a specially carved rails or brackets for boards with irregular shapes
Specifications:
Heating power: 3450W
Top heating: Hot air 800W and IR module 450W
Bottom heating: Second heater hot air 800W, the third IR heater 2200W
Power Supply: AC220V±10 50/60Hz
Device dimensions: 500x420x550 mm
Positioning PCB: V gouge for positioning the PCB, adjustable in each direction using a universal external handle
Temperature control, thermocouple - K sensor, high precision measurement, independent of each heating zone.
PCB dimensions: 370×320mm Min 20×20 mm
BGA dimensions: 80x80 mm
Electronics: temperature control module with high sensitivity, communication with the PC
Net Weight: 26kg
Set contains:
1 Soldering station Techot TH-490
2 Iron soldering station
3 Three nozzles of the upper heater and two lower
4 Components for mounting plates with irregular shapes 6pcs
5 Temperature sensor / thermocouple
6 RS232 communication cable
7 Brush flux distribution
8 Warranty for 24 months
Features:
- Choosing precision materials (temperature sensor, controller, heater) for precise control of soldering / resoldering BGA components
- It has a replaceable top heating module: hot air or infrared.
- Heat output 3.45 kW provides that the device can handle even the largest BGA chips
- Upper heater (hot air or infrared) and lower (infrared) run independently and be able to set 8 rising temperature ranges and 8 fixed. The device can store 10 groups of temperature profiles at the same time
- The device can be connected to a PC via a COM port, allowing control via the included software
- Adjust the upper heater in three dimensions guarantees a perfect adjustable of position the airflow over the solder element
- Specially designed nozzles are immediately magnetic mounted give the ability to set any angle. They have been equipped with special drainage holes which is air does not blow out the elements in around of the solder
- Thermocouple with high sensitivity provides accurate temperature measurement on both sides of the PCB
- Both the heating zone (upper and lower) can be controlled independently.
- Installed fan protects the PCB from overheating and deformation during soldering. After the process cooling PCB
- The device signals the end of the soldering process / resoldering.
- Installation of board is done using a specially carved rails or brackets for boards with irregular shapes
Specifications:
Heating power: 3450W
Top heating: Hot air 800W and IR module 450W
Bottom heating: Second heater hot air 800W, the third IR heater 2200W
Power Supply: AC220V±10 50/60Hz
Device dimensions: 500x420x550 mm
Positioning PCB: V gouge for positioning the PCB, adjustable in each direction using a universal external handle
Temperature control, thermocouple - K sensor, high precision measurement, independent of each heating zone.
PCB dimensions: 370×320mm Min 20×20 mm
BGA dimensions: 80x80 mm
Electronics: temperature control module with high sensitivity, communication with the PC
Net Weight: 26kg
Set contains:
1 Soldering station Techot TH-490
2 Iron soldering station
3 Three nozzles of the upper heater and two lower
4 Components for mounting plates with irregular shapes 6pcs
5 Temperature sensor / thermocouple
6 RS232 communication cable
7 Brush flux distribution
8 Warranty for 24 months
|
||
NEGOTIATE PRICE
If you are interested in
Techot TH-490 Soldering Station
you will probably want to take a look at following products:
You might also be interested in:
+
|
WISDOMSHOW WDS-520 BGA/microBGA Station 3,5KW
more
|
Price:
1618.00 EUR w/o VAT |
+
|
Professional BGA Rework Station Dinghua DH-200 2300W
more
|
Price:
999.00 EUR w/o VAT |
+
|
Techot TH-580 Soldering Station
more
|
Price:
1249.00 EUR w/o VAT |
+
|
Soldering station BGA TouchBGA IR-PRO-SC v6 3in1 4150W
more
|
Price:
1332.00 EUR w/o VAT |
+
|
Soldering station BGA TouchBGA GM490 5,45kW LCD 7"
more
|
Price:
1849.00 EUR w/o VAT |
+
|
Tornado Infra held station
more
|
Price:
259.00 EUR w/o VAT |
+
|
Soldering Station Jetronix-Eco
more
|
Price:
849.00 EUR w/o VAT |
+
|
Soldering station BGA TouchBGA IR6000+HR6000 2in1 3250W
more
|
Price:
927.00 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
