QUICK 715 2in1(double station)760W soldering station

• clear display showing the set and actual temperature of both the soldering iron and the hotair flask,
• the hot air flask is equipped with a sleep mode - putting the flask on the handle causes the station to automatically cool the flask heater to 100C and turn off the fan,
• solid and compact housing,
• processor control high stability of operation, extending the lifetime of heating elements, energy saving,
• remembers the last set temperature,
• hotair airflow adjustment from 10 to 100%,
• the ability to quickly turn off and turn on one of the two soldering irons permanently,
• backlight adjustment from 0 to 50%,
• temperature calibration for both soldering irons,
• the hot air flask fan is driven by a brushless motor, which ensures a much higher durability and reliability of the device than in the case of compressor solutions,
• stock compatible with the most popular 900M bits,
• high temperature silicone wire for soldering irons.

• model: Quick 715
• supply voltage: 220-230V 50 / 60Hz
• power: 760W
• hot air temperature control: 100-500 ° C
• tip temperature control: 100-480 ° C
• temperature stability for both soldering irons: +/- 5 ° C
• air flow up to 120 liters / minute [max]
• soldering iron power: 50W +/- 10%
• potential between tip and ground: <2mV
• resistance between tip and ground: <2Ohm
• dimensions: 98x172x150mm
• weight of the station: 2.9 kg

• Quick 715 soldering station,
• hotair stock support,
• a support for an arrowhead flask with a cleaning sponge,
• spearhead with a spike mounted,
• round nozzle with a diameter of 2.5 mm A2025,
• round nozzle with a diameter of 6.4 mm A2064,
• round nozzle with a diameter of 8,4 mm A2084,
• round nozzle with a diameter of 12.7 mm A2127,
• a key to change nozzles,
• power cord.

• model: Quick 715
• supply voltage: 220-230V 50 / 60Hz
• power: 760W
• hot air temperature control: 100-500 ° C
• tip temperature control: 100-480 ° C
• temperature stability for both soldering irons: +/- 5 ° C
• air flow up to 120 liters / minute [max]
• soldering iron power: 50W +/- 10%
• potential between tip and ground: <2mV
• resistance between tip and ground: <2Ohm
• dimensions: 98x172x150mm
• weight of the station: 2.9 kg

Product placed on the market in the EU before December 13, 2024: YES

Safety Warnings and Usage Guidelines

Based on the requirements of Regulation (EU) 2023/988 on General Product Safety (GPSR), we present a list of safety warnings. The aim is to protect users from potential hazards resulting from improper use of products/devices.

1. General Safety Measures

* Use the device only in accordance with its intended purpose and the manufacturer's instructions.
* Before first use, read the user manual carefully.

Hazards for children:
* Keep the product/device out of reach of children. Children are unable to assess existing risks.

2. Mechanical Hazards

* Check that all components are properly assembled before operating the device.
* Avoid using tools that may damage the product or contribute to its damage. Do not modify the product: do not open/disassemble it!

3. Electrical Hazards
* Connect only to a socket with the appropriate voltage, in accordance with the manufacturer’s requirements.
* Improper handling of products powered by mains voltage may result in fatal electric shock! If the product and/or the connection cable are damaged, do not touch them; there is a risk of fatal electric shock! Never use the device if the power cord is damaged, frayed, or cut. Avoid touching the power cord or plug with wet hands.
* Product with a separate power supply: before connecting the device to a plug-in or external power supply, ensure that the voltage, polarity (plus/+ and minus/-), and plug dimensions (e.g., inner/outer diameter) match the device.
* Product with a mains plug: the power outlet used for connection must be located near the product and easily accessible. Always unplug the power cord by pulling the plug, not the cable.
* Product with a power cord: the power cable must not be pinched, bent, or damaged by sharp edges. Do not place any objects on the power cord or step on it. The cable should always be arranged carefully to prevent tripping.
* Product intended for soldering: use only appropriate electronic solder and an electronic soldering iron. The soldering process should be performed quickly to avoid overheating and possible damage to the product.

4. Usage Precautions

* Place the product on a stable, flat surface to prevent it from tipping over.
* Always maintain sufficient space around the device (as recommended by the manufacturer) to ensure proper ventilation.
* The operation of certain products (e.g., machines or tools) requires the use of personal protective equipment to minimize health or other risks. This includes, for example, suitable hearing protection, an appropriate respirator/dust mask, or safety goggles, as well as proper gloves, safety footwear, and clothing.

5. Maintenance and Cleaning
* Before performing maintenance or cleaning, read the product’s user manual.
* Improper cleaning agents may not only damage the product but also cause other hazards — follow the manufacturer’s guidelines.

6. User Warnings
* Elderly persons or individuals with limited mobility should exercise particular caution when operating the product and, if necessary, seek assistance from another person.
* If the device operates abnormally (e.g., emits smoke, overheats, or produces unusual sounds), immediately switch it off, disconnect it from power, and contact authorized service.
* Store the product in a dry and cool place to prevent mechanical and electrical damage.

7. Disposal
* All electrical and electronic equipment placed on the European market must be properly disposed of. This means that, at the end of its service life, the device must be disposed of separately from unsorted household waste.

8. Importance of Following the Warnings
Following the above warnings minimizes the risk of personal injury, device malfunction, and material losses. Ignoring these recommendations may lead to serious health and material hazards. Protect yourself and your loved ones by following the indicated safety measures. Detailed warnings or product safety information are available in the user manual supplied with the product or in PDF format on the manufacturer’s/supplier’s website.