|
Main page > Repair Equipment > Soldering Equipment > Smoke Absorbers > JC300 smoke and dust vapor absorber
|
 |
JC300 smoke and dust vapor absorber
JC300 smoke and dust vapor absorber - with high specific filtration of 99.97% - has a three-stage application system: initial, HEPA and main active carbon - quickly and eliminating the negative impact on the environment. High level of ventilation, air regulation, compact size and high mobility are just a few of the advantages. The model is independent and can be used in all electronics workshops, services and DIY activities.
JC300 smoke and dust vapor absorber
- high filtering efficiency of 99.97%
- set of filters: carbon, hepa, 2x preliminary
- compact sizes
- simple controls
- easy filter replacement
- aesthetic workmanship
- very good price/effectiveness ratio
- possibility of transportation - mobile
A table-top fume and smoke absorber is a great way to clean the air of toxic substances generated, for example, during soldering, which pose a risk to the health of users. The model is a suitable tool for use in all electronics workshops, services and DIY activities.
The presented model is ideal as an absorber of dust, smoke and fumes generated in beauty salons.
Compact size, high filtering efficiency and aesthetic appearance, low weight - these are the advantages of this absorber.
Due to its weight and size, it is easy to move and transport to the place where work will be performed.
NOTE: Before first use, remove the protective foil from the filters!
The absorber removes impurities, has speed control and 3 filters with a filtering efficiency of 99.97%.
The most important features:
- compact structure, simple installation, high mobility without the need to connect additional suction pipes and fume exhaust systems
- low noise level in the range of 48dB - 59 dB
- a fan with a brushless motor produces adequate air flow
- triple filtering system - removes harmful substances from vapors to provide adequate protection for the operator
- flexible suction pipe ensuring freedom of maneuvering without the need to install additional connectors
- speed regulation allows you to adjust the suction force of the absorber to a given application
- large, easy-to-read LCD display
The modern fume absorber works universally. Safely absorbs smoke, vapors or gases harmful to the operator, ensuring low concentration of hazardous substances.
Technical Specifications
- supply voltage: 230VAC
- suction hole diameter: 60mm
- noise level: 48 dB - 59 dB
- filtering effect: 0.3um 99.97%
- power: 15W
- width: 20cm
- length: 20cm
- height: 11cm (without nozzle)
- weight: approx. 2 kg
Characteristic
- high level of air flow,
- air flow regulation,
- flexible pipe and wide suction nozzle adapting to a given application,
- three-stage filtration,
- quick and easy filter replacement.
The PhoneMate JH300 vapor absorber has a three-stage purification system: preliminary, HEPA and main active carbon - quickly and precisely removing toxic substances from the air. High-class filters are characterized by much better efficiency and accuracy in capturing small vapor particles than when using only a carbon filter.
Pre-filter: pre-filters the air and captures all larger contaminants present in the vapors - above 50um. Recommended replacement interval is every 2 months.
HEPA middle filter: thoroughly filters the air from all impurities. For particles above 0.3µm, its filtering efficiency reaches 99.97%. Recommended replacement period is 2 to 3 months.
Carbon main filter: absorbs all unwanted and harmful fumes. For particles above 0.3µm, its filtering efficiency reaches 99.97%. When filtering dangerous gases, its efficiency reaches over 95%. Recommended replacement period is 3 to 6 months.
The specified replacement period for each filter may be extended or shortened depending on the degree of contamination and intensity of use.
Ease of use is guaranteed by flexible pipes, which enable convenient movement of the fume-absorbing nozzles to achieve the best results. The device is easy to use and quickly fits into any workplace.
Suction arm
- The suction arm is one of the basic elements of fume absorbers. Thanks to them, we can freely adjust our fume absorber according to our preferences.
- Technical parameters:
- suction pipe length: 54cm
- outer diameter of the suction pipe: 60mm
- inner diameter of the suction pipe: 55mm
- arm mounting method: screwed into the absorber socket
Suction nozzle
- A necessary addition to every absorber. The purpose of the nozzle is to extensively absorb emerging vapors during, for example, service work or soldering processes.
- Technical parameters:
- outer diameter: 80mm
- black colour
- material: plastic
- nozzle installation method: screwed onto the pipe
Carbon main filter
Absorbs all unwanted and harmful fumes. For particles above 0.3µm, its filtering efficiency reaches 99.97%. When filtering dangerous gases, its efficiency reaches over 95%. Recommended replacement period is 3 to 6 months.
Technical parameters:
height: 17.5cm
width: 17.5cm
thickness: 10mm
replacement period: 3 to 6 months.
Quantity: 1 pc.
HEPA middle filter
It thoroughly filters the air from all impurities. For particles above 0.3µm, its filtering efficiency reaches 99.97%. Recommended replacement period is 2 to 3 months.
Technical parameters:
height: 17.5cm
width: 17.5cm
thickness: 10mm
replacement period: 2 to 3 months.
Quantity: 1 pc.
Prefilter
It pre-filters the air and captures all larger contaminants present in the vapors - above 50um. Recommended replacement interval is every 2 months.
Technical parameters:
height: 17.5cm
width: 17.5cm
thickness: 5mm
replacement period: every 2 months.
Quantity: 2 pcs.
The set includes:
PhoneMate JH300 fume absorber - 1 pc.
high-class carbon filter - 1 pc.
high-class HEPA filter - 1 pc.
high-class pre-filter - 2 pcs.
suction arm (pipe) - 1 pc.
suction nozzle - 1 pc.
power cord - 1 pc.
user manual
|
||
NEGOTIATE PRICE
If you are interested in
JC300 smoke and dust vapor absorber
you will probably want to take a look at following products:
You might also be interested in:
+
|
Diamond nozzle for Waterun Fumego SE-80 and SE-180 fume extractors
more
|
Price:
12.00 EUR w/o VAT |
+
|
Quick 6101 Fume Extractor
more
|
Price:
542.00 EUR w/o VAT |
+
|
Main filter for the fume absorber 3w1- Waterun Fumego SE-180
more
|
Price:
61.00 EUR w/o VAT |
+
|
ZD-153A Soldering Smoke Extractor
more
|
Price:
58.00 EUR w/o VAT |
6001_6002_small.png)
+
|
Carbon main filter for fume extractor WATERUN F6001D / F6002D
more
|
Price:
61.00 EUR w/o VAT |
+
|
Central filter for fume extractor - WATERUN F6001D, F6002D
more
|
Price:
31.00 EUR w/o VAT |
+
|
ESD Quick 493AE solder fume extractor with a stand
more
|
Price:
49.00 EUR w/o VAT |
+
|
Waterun Fumego Solder F800 table-type smoke absorber with a pipe
more
|
Price:
366.00 EUR w/o VAT |
This product was bought most often with:
+
|
Dry lube 400ml (areosol)
more
|
Price:
6.40 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
