|
Main page > Repair Equipment > Soldering Equipment > Smoke Absorbers > Fume Extractor F6001D Waterun digital smoke absorber
|
 |
Fume Extractor F6001D Waterun digital smoke absorber
5
(2)
Fume Extractor F6001D Waterun digital smoke absorber is a great way to clean the air of toxic substances generated, for example, during soldering, which pose a health risk to users. The model is the right tool for use in all electronics workshops, services and DIY. The equipment removes contamination from two stations at the same time, and at the same time has a built-in sensor informing about the need to replace the filter and the lack of patency of the suction pipes.
The most important features:
- compact structure, simple installation, high mobility without the need to connect additional installations of suction pipes and vapors extraction systems
- low noise <55dB
- the ability to control the device with a wireless remote control
- a powerful fan with a brushless motor generates a correspondingly large air flow
- triple filtering system - removes harmful substances from vapors to provide adequate protection for the operator
- pre-filter and intermediate filter can be replaced separately, which extends main filter life and reduces operating costs
- cyclic filtration system prevents cold / hot air from blowing out
- wide range of absorption arms and nozzles
- flexible suction pipe that allows for any maneuvering without the need for additional connectors
- speed control every 10% makes it possible to adjust the suction power of the absorber to a given application
- LCD display showing programmed filter operation time (timer)
- audible alarm for exceeding the working time
- alarm for lack of obstruction of the suction lines
- alarm informing about the need to replace the main filter
- The modern fume extractor has a versatile effect. It safely absorbs fumes, vapors or gases harmful to the operator, ensuring a low level of hazardous substances.
The Waterun F6001D fume absorber has a three-stage purification system: initial, HEPA and the main active carbon - quickly and precisely removes poisonous substances from the air. High-class filters are characterized by much better efficiency and accuracy in catching fine vapor particles than in the case of using only a carbon filter.
Pre-filter: it pre-filters the air and captures any larger contaminants in the vapors - above 50um. Recommended replacement period every 2 months.
HEPA middle filter: thoroughly filters the air from any impurities. For particles above 0.3μm, its filtering efficiency reaches 99.97%. Recommended replacement period from 2 to 3 months.
Carbon main filter: absorbs all unwanted and harmful fumes. For particles above 0.3μm, its filtering efficiency reaches 99.97%. When filtering dangerous gases, its efficiency is above 95%. Recommended replacement period from 3 to 6 months.
The specified replacement period for each filter may be lengthened or shortened depending on the degree of contamination and intensity of use.
6001_6002_2.png)
Ease of use is guaranteed by flexible pipes, allowing the convenient movement of the vapor-absorbing nozzles to achieve the best results. The device is easy to install and quickly fits into any workplace. Mobility is due to four rotating wheels (including with a position lock) and a handle with which you can move and move the soldering fume extractor to any place.
Optionally, you can buy a plug for one of the zones and use only the other.
Features:
- sensor informing about the necessity to replace filters and obstruction of the suction system
- high air flow
- flexible hoses and silicone suction nozzles that adapt to the application
- multi-stage filtration
- built-in time from 1 to 999min
Technical Specifications:
supply voltage: 230VAC
power: 210W
maximum air flow: 310 m3 / h
air flow: 17m / s
noise level: ≤ 55 dB
filtering effect: 0.3um 99.97%
suction tube length: 1.3 m
pipe mounting diameter in the absorber: 80mm
diameter and length of the suction tube: 75mm
dimensions: (LxWxH) 42.50 x 24.50 x 45.00 cm
weight: 18.0 kg
The kit includes:
fume absorber F6001D 1 pc
extraction arm 1 pc
silicone suction nozzle 1 pc
power cord
remote control
spare 4 pcs of pre-filters
English user manual
extraction arm 1 pc
silicone suction nozzle 1 pc
power cord
remote control
spare 4 pcs of pre-filters
English user manual
|
||
NEGOTIATE PRICE
If you are interested in
Fume Extractor F6001D Waterun digital smoke absorber
you will probably want to take a look at following products:
You might also be interested in:
+
|
Waterun Fumego Solder F800 table-type smoke absorber
more
|
Price:
325.00 EUR w/o VAT |
+
|
Soldering Smoke Absorber CT629 ESD
more
|
Price:
99.00 EUR w/o VAT |
+
|
Pre-filter QUICK 6101/6102
more
|
Price:
9.30 EUR w/o VAT |
+
|
Fume Extractor F6001D Waterun digital smoke absorber two-zone
more
|
Price:
500.00 EUR w/o VAT |
+
|
JC300 smoke and dust vapor absorber
more
|
Price:
125.00 EUR w/o VAT |
+
|
Round silicone nozzle for fume extractors WATERUN F6001D, F6002D
more
|
Price:
16.00 EUR w/o VAT |
6001_6002_small.png)
+
|
Carbon main filter for fume extractor WATERUN F6001D / F6002D
more
|
Price:
61.00 EUR w/o VAT |
+
|
Central filter for fume extractor - WATERUN F6001D, F6002D
more
|
Price:
46.00 EUR w/o VAT |
This product was bought most often with:
+
|
Aluminium foil tape 50mm x 40m
more
|
Price:
14.00 EUR w/o VAT |
+
|
USB Charging IC - NXP 1610A3 U4500 (tristar)
more
|
Price:
7.00 EUR w/o VAT |
+
|
WYLIE Dot-repairing soldering lug reconstruction pads
more
|
Price:
10.00 EUR w/o VAT |
+
|
Fonekong blade for cleaning CPU
more
|
Price:
5.00 EUR w/o VAT |
+
|
ESD Workstation Mat GD510 40x50 cm
more
|
Price:
14.00 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
