 |
XPIN Clip with cables set
5
(3)
This product cannot be purchased using Paypal due to their restriction on computer surveillance products. Other payment methods available.
XPIN Clip allows you to get user passcode from iPhone, iPad 7.x.x and PIN, Backup PIN, PatternLock from Android phones/tablets that supports USB OTG. XPIN Clip does not require resetting your device which entails deleting data and reverts the device to factory settings. XPIN Clip work without: USB debugging, root, custom recovery, lost data, lost warranty - KNOX flag or unlocking bootloader in some devices). XPIN CLIP is also helpfull for forensic investigation where in some cases you can not undermine the integrity of the data (like: root, custom recovery etc.)
Functions and supported systems:
iOS: 4 digit Passcode from all devices working on iOS 7.x.x** (also supports "iPhone is disabled connect to iTunes" and "iPhone is disabled try again in 23 million minutes")
ANDROID PIN: 4 to 8 digit PIN code from all devices working on Android 4.x.x/5.x supported USB OTG like Samsung, HTC, Sony etc (from Sony Android 4.3+)
HTC PIN: 4 to 8 digit PIN code from HTC Android supported USB OTG
SAMSUNG BACKUP PIN 4.X/5.X: 4 to 8 digit Backup PIN code from Samsung Android 4.x.x and 5.x phones supported USB OTG
SONY PIN: 4 to 8 digit PIN code from Sony Android 4.3+
PATTERN*: 4 and 5 digits (dots) PatternLock (SWIPE) from all Android phones supported OTG USB
MOUSE PIN : 4 digits/dots "PIN" where OTG USB Keyboard is blocked and for third party locker application like CM Locker
* - future paid upgrade available for supporting 6,7,8 and 9 dots path codes (update comes with the adapter and the access to the server to generate correct combinations)
** - If the device is set to erase the phone after 10 incorrect attempts to enter your passcode , your data will be deleted! < / I>
Photo od Pattern Adapter connected to clip (adapter are not included in standard set - will be addedd only if option selected)
Recovery Methods:
Range: range of 4 digit PIN (increase and decrease)
Mask: 4 digit mask that allow to speed up recovery PIN code if we known at least 1 digit and her position
Date: this method check all PIN combination that could be a day-month or month-day configuration
Popular: this method check all most popular 4 digit PIN
Advanced: this method allow you to check PIN that is longer than 4 digit (max 8 digit) also with mask, you can set increase or decrease direction
Paths (only for PATTERN): length of PatternLock
Compare function of XPIN to other devices on market:
Remove/Recovery Speed
- iOS Passcode - about 600 codes per hour
- iOS Passcode 8.0-8.1 - about 60codes per hour
- Macbook EFI - about 280codes per hour
- PIN Android OTG - about 550 codes per hour
- PatterLock Android OTG - about500 codes per hour
- Backup PIN Android 4.x.x (Samsung) - about 3600 codes per hour
- Backup PIN Android 5.x (Samsung) - about 550 codes per hour
- Backup PIN Android 4.X, 5.X, 6.X (LG) - about 3600codes per hour
- Android MOUSE PIN - about 470codes per hour
- Android PIN 6.X (30 SEC / 1 ATTEMPT) - about 120codes per hour
Models supported USB OTG
Acer
Liquid Gallant E350, Liquid X1, Iconia Tab A200/A500/A700, ICONIA A1-810
Archos
G9, Notion Ink Adam
Apple
iPhone 4/4S, iPhone 5 (CDMA), iPhone 5 (GSM), iPhone 5c (CDMA), iPhone 5c (GSM), iPhone 5s (CDMA), iPhone 5s (GSM), iPhone 6, iPhone 6 Plus, iPad 2, iPad 3, iPad mini 3, iPad 4, iPad Air, iPad Air 2, iPod Touch ,iPod Touch 5G
ASUS
Padfone II, New Padfone Infinity, Padfone mini A11, Padfone E A68M, Padfone S PE500KL, Zenfone 4/5/6, Google Nexus 7 (I/II ver.), Memo Pad 7 ME172
HTC
One M8, One, One (M8) Dual Sim, One X, One X+, One Mini, One Mini 2, One Max, One (M8) CDMA, Desire 500, Desire 601, Desire 600, Desire 700, Desire 700 Dual Sim, Desire 816, Desire 820, One M8 Prima, Desire X, Desire U, J, Butterfly, Butterfly S, Desire EYE (M910X)EVO 4G LTE
Huawei
Ascend P7 Sapphire Edition, Ascend P7, Ascend P7 mini, Ascend P6, Ascend P6 S, Ascend P1, Ascend Mate7, Ascend Mate2, Ascend Mate2 4G, Ascend G7, Ascend G700, Ascend Honor 3, Ascend D, Ascend D1, Ascend D1 XL U9500E, Ascend D quad, mediaPad 7 Lite, MediaPad, Mediapad S7-301w
Lenovo
P700, P770, P780, A859, K900, Vibe X S960
LG
Nexus 5, G Flex, G Pro 2, G2, G3, G3 (CDMA), G3 LTE-A, Vu 3 F300L, Optimus G Pro, Optimus G Pro lite, Optimus G2, G Flex, GPad 7.0, G Pad 10.1
MicroMax
A110Q Canvas 2 Plus, A116 Canvas HD, A110 Canvas 2
Motorola
Droid RAZR MAXX, Razr HD, Moto G, XT910, XT912, Droid 4 / 4G, MB865 Atrix 2, Xoom
OPPO
R5, N3, Neo 5, Neo 3, N1 mini, N1, Find7, Find7a
Samsung
Note4, S5 Plus, S5 Sport, S5 LTE-A G901F / G906S, S5, K/S5 Zoom, S5 Octa-Core, S5 G9009FD, S5 CDMA, S5 Active, S5 Duos, S4 I9500, S4 I9505 , S4 zoom, S4 Active I9295 , S4 I9506 , S4 Active LTE-A, S4 I9502 , S4 CDMA, S III I9300 , S III I9305 , S III I747, S III T999, S III CDMA, S II I9100G , S II HD LTE, S II Duos I929, S II T989, S II I9100 , S II I777, S II LTE I9210, S II Epic 4G Touch, S II 4G I9100M, S II X T989D, Note N9000, Note N7100, Note N7000, Note I717, Note T879, Ace3 S7270, Ace S5830i, Nexus I9250, Mega 6.3 I9200, J, F, N810, Note 8.0 N5100, Note 10.1 2014, Tab 2.7.0 i705
Sony
Xperia Z3, Xperia Z3 Compact, Xperia Z2A, Xperia Z2, Xperia Z1, Xperia Z1 Compact, Xperia Z1S, Xperia Z, Xperia Z Ultra, Xperia ZL, Xperia ZR, Xperia M, Xperia M2, Xperia M2 Aqua, Xperia E3, Xperia E3 Dua, Xperia M2 Dual, Xperia U, Xperia S, Xperia P, Xperia Miro, Xperia Go, Xperia T, Xperia SL, Xperia ion LTE, Xperia LT29i Hayabusa, Xperia Acro S, Ericson Xperia Arc S, Xperia Neo V, Xperia J, Xperia Sola, Xperia SP, Xperia TX, Xperia V
Xiaomi
MI-4, MI-3, MI-2, MI-2S, MI-2A, Redmi Note, Redmi Note 4G, Hongmi 1S, Hongmi, Mi Pad 7.9
TIP: How check is the phone or tablet will be work with XPIN Clip ????
You will need USB OTG cable and USB keyboard or mouse, just connect to the phone and check they are detect.
Sample movies from working with XPIN
4 digit Backup PIN - LG G4 Android 6.0
MOUSE PIN - Sony Xperia Z3 Android 5.1.1
4 digit Mackbook EFI PIN
4 dots PatternLock Sony Xperia M2 Android 4.4.4
4 dots PatternLock HTC Desire 820 Android 4.4.4
4 digit Passcode iPhone 7.1.2
5 dots PatternLock Samsung Galaxy Note 3 Android 5.0
4 digit PIN code Sony Xperia Z Android 4.3
4 digit Backup PIN Samsung Galaxy S4 Android 4.4.2
Other films of XPIN Clip in action:
5 digit PIN code Sony Xperia S - Android 4.1.2 - Video
4 digit Backup PIN Samsung Galaxy Note 3 - Android 5.0 - Video
4 digit Backup PIN Samsung Galaxy S3 - Android 4.0.4 - Video
4 digit Passcode iPhone 5S - iOS 7.1.2 - Video
4 digit Passcode iPad 2 - iOS 7.1.2 - Video
Android OTG charging function - Video
Changelog:
1.2.7
- added ability to perform bruteforce attack on Android 6.x phones, option WAITING 30 SEC/1 ATP - each new PIN code will be entered after 30 seconds. For phones with Android OS below 6.x you have to choose 30SEC/5 ATP option, you can also ignore wating time between attempts, just set WAITING option on DISABLED
- added MODE option in menu 10. MOUSE PIN added MODE option that allow you to customized attack for different brand phones - for now available are: NORMAL (standard attack), HTC (for HTC phones), HUA (for Huawei phones)
1.2.6
- added ability to set light sensor time reaction for PATTERN and MOUSE PIN, option TIMING you can set between the range of 500ms - 3000ms
- fixed raporting bug that caused no 30 seconds waiting between 5 attempts when CHARGING option was set on MIN/PIN for PATTERN and MOUSE PIN.
1.2.5
- added change screen resolution: SD - to 720p, HD - from 1080p (this option is available for PATTERN and MOUSE PIN)
- added ability to disabled 30 seconds waiting time between PIN attempts for ANDRIOD OS
1.2.4
- added new type of entering PIN code using cursor/mouse in Android phones, new brutteforce attack is useful when phone have disabled OTG keyboard on lockscreen but mouse works correctly. This option is available in new menu "10. MOUSE PIN"
- deleted CM PIN (CM LOCKER) in PATTERN from now this attack you can perform using MOUSE PIN that is also configurable.
- modified SHIFT parameter now is configurable in two axis X and Y, this modification is available for both mode PATTERN and MOUSE PIN
- modified SWIPE TEST, mouse cursor moves diagonally to test XY axis
- fixed raported bugs
1.2.3
- added option for bruteforce 4 PIN for MacBook EFI
- adjusted firmware for wokring with XPIN Clip Adapter 8.0 - 8.1
- reprogramming light sensor behavior for last value in TIMING option, from now sampling rate is 100 measurements per second through entire set time
1.2.2
- fixed bug that caused no 30 seconds waiting between 5 attempts when CHARGING option was enabled for Android PIN
1.2.1
- added emulation for right and left mouse button, from now you can use XPIN Clip like a mouse. This function is helpful when touch screen is broken, and after successfull bruteforce attack, we want enabled e.g. USB Debbuging for further analysis of phone content. This function is available when CURSOR is enabled (when we have selected Backup PIN or Patternlock in main menu). RUN button is responsible for left mouse button, BREAK for right mouse button.
- fixed issue with saving Timing settings to XPIN Clip memory
1.2.0
- added the ability to automatically transition between patternlock length (option is only available for Patternlock Adapter)
1.1.9
New sign "|" between readed value from sensor and set value works in two directions, if value from sensor increase or decrease
by the set value, XPIN CLip stop bruteforce PIN or pattern.
- added the ability to charge between attempts 30 sec. waiting time, to use this function set BEETWEN in CHARGING menu
- added new menu preparing to work with the iOS 8.0-8.1 adapter
- fixed raported bugs
1.1.8
- added CHARGING option for PatternLock
- fixed raported bugs
1.1.7
- added adapter detection on power on XPIN Clip
(if you connected adapter on power on clip and menu PATHS SD display NO DETECTION just click SET button after few second adapter will be mounted and you see "ADAPTER OK!")
- added support for Pattern Adapter - this update is required for all who want to use adapter, here you can generate path
1.1.6
- fixed a bug that caused problems when runing PATTERNLOCK with enabled AWAKE-> MOUSE MOVE option
- improved reading from light sensor, now XPIN Clip detects changes on the screen faster and more accurately when you unlock your phone
- added the possibility remove PIN lock protected with CM LOCKER
How to perform:
1. In menu "2.Android PIN", select "RANGE" and set the code from which you want to start, set the first 4 digits (second 4 digits of range is not used)
2. Go to "7.PATTERNLOCK" menu and in "PATHS" option select "CM PIN"
3. Set SHIFT value, use the "SWIPE TEST" to adjust the correct SHIFT value moves.
4. Move the cursor to the position at which you want start the procedure (first digit selected in the RANGE)
5. Set light sensor
6. RUN XPIN Clip
1.1.5
- fixed a bug that caused problems with run ADVANCED option in ANDROID PIN mode
- Backup PIN Android 4.x.x for Samsung was rename this option now is "B.PIN Android 4.x.x SAM/LG" and "B.PIN Android 5.x.x SAM/LG" - this option work as well with LG Backup PIN
- fixed no data signaling (red LED) when entering Patternlock
1.1.4
- improved working with Huawei phones (PIN code)
- added AWAKE parameter for PIN/BACKUP PIN in HTC phones ( wake , preventing the extinction of the display when you enter your character , necessary in some phone models , the default parameter off) :
OPTIONS :
1. DISABLED - Parameter Off
2. MOUSE MOVE - then move the mouse
3. LEFT CLICK - click the left mouse button
4. RIGHT CLICK - click the right mouse button
5. ENTER PRESS - press the Enter key
1.1.3
- improved working with Huawei phones (PIN code)
- added option set of type light sensor/sensitivity, you can choose 3 types (T1, T2, T3)
- added option save setting for light sensor and timings
1.1.2
- added a new parameter AWAKE ( wake , preventing the extinction of the display when you enter your character , necessary in some phone models , the default parameter off) :
OPTIONS :
1. DISABLED - Parameter Off
2. MOUSE MOVE - then move the mouse
3. LEFT CLICK - click the left mouse button
4. RIGHT CLICK - click the right mouse button
5. ENTER PRESS - press the Enter key
Set contains:
- XPIN Clip by Multi-COM
- JACK cable with light sensor
- USB HOST 3in1 with charging for iPhone/iPad/micro USB
- cable OTG micro USB for Android with charging option
- instructions/manual
- warranty
We offer 12 months of warranty for this product
Functions and supported systems:
* - future paid upgrade available for supporting 6,7,8 and 9 dots path codes (update comes with the adapter and the access to the server to generate correct combinations)
** - If the device is set to erase the phone after 10 incorrect attempts to enter your passcode , your data will be deleted! < / I>
Photo od Pattern Adapter connected to clip (adapter are not included in standard set - will be addedd only if option selected)
Recovery Methods:
Compare function of XPIN to other devices on market:
Remove/Recovery Speed
- iOS Passcode - about 600 codes per hour
- iOS Passcode 8.0-8.1 - about 60codes per hour
- Macbook EFI - about 280codes per hour
- PIN Android OTG - about 550 codes per hour
- PatterLock Android OTG - about500 codes per hour
- Backup PIN Android 4.x.x (Samsung) - about 3600 codes per hour
- Backup PIN Android 5.x (Samsung) - about 550 codes per hour
- Backup PIN Android 4.X, 5.X, 6.X (LG) - about 3600codes per hour
- Android MOUSE PIN - about 470codes per hour
- Android PIN 6.X (30 SEC / 1 ATTEMPT) - about 120codes per hour
Models supported USB OTG
Acer
Liquid Gallant E350, Liquid X1, Iconia Tab A200/A500/A700, ICONIA A1-810
Archos
G9, Notion Ink Adam
Apple
iPhone 4/4S, iPhone 5 (CDMA), iPhone 5 (GSM), iPhone 5c (CDMA), iPhone 5c (GSM), iPhone 5s (CDMA), iPhone 5s (GSM), iPhone 6, iPhone 6 Plus, iPad 2, iPad 3, iPad mini 3, iPad 4, iPad Air, iPad Air 2, iPod Touch ,iPod Touch 5G
ASUS
Padfone II, New Padfone Infinity, Padfone mini A11, Padfone E A68M, Padfone S PE500KL, Zenfone 4/5/6, Google Nexus 7 (I/II ver.), Memo Pad 7 ME172
HTC
One M8, One, One (M8) Dual Sim, One X, One X+, One Mini, One Mini 2, One Max, One (M8) CDMA, Desire 500, Desire 601, Desire 600, Desire 700, Desire 700 Dual Sim, Desire 816, Desire 820, One M8 Prima, Desire X, Desire U, J, Butterfly, Butterfly S, Desire EYE (M910X)EVO 4G LTE
Huawei
Ascend P7 Sapphire Edition, Ascend P7, Ascend P7 mini, Ascend P6, Ascend P6 S, Ascend P1, Ascend Mate7, Ascend Mate2, Ascend Mate2 4G, Ascend G7, Ascend G700, Ascend Honor 3, Ascend D, Ascend D1, Ascend D1 XL U9500E, Ascend D quad, mediaPad 7 Lite, MediaPad, Mediapad S7-301w
Lenovo
P700, P770, P780, A859, K900, Vibe X S960
LG
Nexus 5, G Flex, G Pro 2, G2, G3, G3 (CDMA), G3 LTE-A, Vu 3 F300L, Optimus G Pro, Optimus G Pro lite, Optimus G2, G Flex, GPad 7.0, G Pad 10.1
MicroMax
A110Q Canvas 2 Plus, A116 Canvas HD, A110 Canvas 2
Motorola
Droid RAZR MAXX, Razr HD, Moto G, XT910, XT912, Droid 4 / 4G, MB865 Atrix 2, Xoom
OPPO
R5, N3, Neo 5, Neo 3, N1 mini, N1, Find7, Find7a
Samsung
Note4, S5 Plus, S5 Sport, S5 LTE-A G901F / G906S, S5, K/S5 Zoom, S5 Octa-Core, S5 G9009FD, S5 CDMA, S5 Active, S5 Duos, S4 I9500, S4 I9505 , S4 zoom, S4 Active I9295 , S4 I9506 , S4 Active LTE-A, S4 I9502 , S4 CDMA, S III I9300 , S III I9305 , S III I747, S III T999, S III CDMA, S II I9100G , S II HD LTE, S II Duos I929, S II T989, S II I9100 , S II I777, S II LTE I9210, S II Epic 4G Touch, S II 4G I9100M, S II X T989D, Note N9000, Note N7100, Note N7000, Note I717, Note T879, Ace3 S7270, Ace S5830i, Nexus I9250, Mega 6.3 I9200, J, F, N810, Note 8.0 N5100, Note 10.1 2014, Tab 2.7.0 i705
Sony
Xperia Z3, Xperia Z3 Compact, Xperia Z2A, Xperia Z2, Xperia Z1, Xperia Z1 Compact, Xperia Z1S, Xperia Z, Xperia Z Ultra, Xperia ZL, Xperia ZR, Xperia M, Xperia M2, Xperia M2 Aqua, Xperia E3, Xperia E3 Dua, Xperia M2 Dual, Xperia U, Xperia S, Xperia P, Xperia Miro, Xperia Go, Xperia T, Xperia SL, Xperia ion LTE, Xperia LT29i Hayabusa, Xperia Acro S, Ericson Xperia Arc S, Xperia Neo V, Xperia J, Xperia Sola, Xperia SP, Xperia TX, Xperia V
Xiaomi
MI-4, MI-3, MI-2, MI-2S, MI-2A, Redmi Note, Redmi Note 4G, Hongmi 1S, Hongmi, Mi Pad 7.9
TIP: How check is the phone or tablet will be work with XPIN Clip ????
You will need USB OTG cable and USB keyboard or mouse, just connect to the phone and check they are detect.
Sample movies from working with XPIN
4 digit Backup PIN - LG G4 Android 6.0
MOUSE PIN - Sony Xperia Z3 Android 5.1.1
4 digit Mackbook EFI PIN
4 dots PatternLock Sony Xperia M2 Android 4.4.4
4 dots PatternLock HTC Desire 820 Android 4.4.4
4 digit Passcode iPhone 7.1.2
5 dots PatternLock Samsung Galaxy Note 3 Android 5.0
4 digit PIN code Sony Xperia Z Android 4.3
4 digit Backup PIN Samsung Galaxy S4 Android 4.4.2
Other films of XPIN Clip in action:
Changelog:
- added ability to perform bruteforce attack on Android 6.x phones, option WAITING 30 SEC/1 ATP - each new PIN code will be entered after 30 seconds. For phones with Android OS below 6.x you have to choose 30SEC/5 ATP option, you can also ignore wating time between attempts, just set WAITING option on DISABLED
- added MODE option in menu 10. MOUSE PIN added MODE option that allow you to customized attack for different brand phones - for now available are: NORMAL (standard attack), HTC (for HTC phones), HUA (for Huawei phones)
- added ability to set light sensor time reaction for PATTERN and MOUSE PIN, option TIMING you can set between the range of 500ms - 3000ms
- fixed raporting bug that caused no 30 seconds waiting between 5 attempts when CHARGING option was set on MIN/PIN for PATTERN and MOUSE PIN.
- added change screen resolution: SD - to 720p, HD - from 1080p (this option is available for PATTERN and MOUSE PIN)
- added ability to disabled 30 seconds waiting time between PIN attempts for ANDRIOD OS
- added new type of entering PIN code using cursor/mouse in Android phones, new brutteforce attack is useful when phone have disabled OTG keyboard on lockscreen but mouse works correctly. This option is available in new menu "10. MOUSE PIN"
- deleted CM PIN (CM LOCKER) in PATTERN from now this attack you can perform using MOUSE PIN that is also configurable.
- modified SHIFT parameter now is configurable in two axis X and Y, this modification is available for both mode PATTERN and MOUSE PIN
- modified SWIPE TEST, mouse cursor moves diagonally to test XY axis
- fixed raported bugs
- added option for bruteforce 4 PIN for MacBook EFI
- adjusted firmware for wokring with XPIN Clip Adapter 8.0 - 8.1
- reprogramming light sensor behavior for last value in TIMING option, from now sampling rate is 100 measurements per second through entire set time
- fixed bug that caused no 30 seconds waiting between 5 attempts when CHARGING option was enabled for Android PIN
- added emulation for right and left mouse button, from now you can use XPIN Clip like a mouse. This function is helpful when touch screen is broken, and after successfull bruteforce attack, we want enabled e.g. USB Debbuging for further analysis of phone content. This function is available when CURSOR is enabled (when we have selected Backup PIN or Patternlock in main menu). RUN button is responsible for left mouse button, BREAK for right mouse button.
- fixed issue with saving Timing settings to XPIN Clip memory
- added the ability to automatically transition between patternlock length (option is only available for Patternlock Adapter)
New sign "|" between readed value from sensor and set value works in two directions, if value from sensor increase or decrease
by the set value, XPIN CLip stop bruteforce PIN or pattern.
- added the ability to charge between attempts 30 sec. waiting time, to use this function set BEETWEN in CHARGING menu
- added new menu preparing to work with the iOS 8.0-8.1 adapter
- fixed raported bugs
- added CHARGING option for PatternLock
- fixed raported bugs
- added adapter detection on power on XPIN Clip
(if you connected adapter on power on clip and menu PATHS SD display NO DETECTION just click SET button after few second adapter will be mounted and you see "ADAPTER OK!")
- added support for Pattern Adapter - this update is required for all who want to use adapter, here you can generate path
- fixed a bug that caused problems when runing PATTERNLOCK with enabled AWAKE-> MOUSE MOVE option
- improved reading from light sensor, now XPIN Clip detects changes on the screen faster and more accurately when you unlock your phone
- added the possibility remove PIN lock protected with CM LOCKER
How to perform:
1. In menu "2.Android PIN", select "RANGE" and set the code from which you want to start, set the first 4 digits (second 4 digits of range is not used)
2. Go to "7.PATTERNLOCK" menu and in "PATHS" option select "CM PIN"
3. Set SHIFT value, use the "SWIPE TEST" to adjust the correct SHIFT value moves.
4. Move the cursor to the position at which you want start the procedure (first digit selected in the RANGE)
5. Set light sensor
6. RUN XPIN Clip
- fixed a bug that caused problems with run ADVANCED option in ANDROID PIN mode
- Backup PIN Android 4.x.x for Samsung was rename this option now is "B.PIN Android 4.x.x SAM/LG" and "B.PIN Android 5.x.x SAM/LG" - this option work as well with LG Backup PIN
- fixed no data signaling (red LED) when entering Patternlock
- improved working with Huawei phones (PIN code)
- added AWAKE parameter for PIN/BACKUP PIN in HTC phones ( wake , preventing the extinction of the display when you enter your character , necessary in some phone models , the default parameter off) :
OPTIONS :
1. DISABLED - Parameter Off
2. MOUSE MOVE - then move the mouse
3. LEFT CLICK - click the left mouse button
4. RIGHT CLICK - click the right mouse button
5. ENTER PRESS - press the Enter key
- improved working with Huawei phones (PIN code)
- added option set of type light sensor/sensitivity, you can choose 3 types (T1, T2, T3)
- added option save setting for light sensor and timings
- added a new parameter AWAKE ( wake , preventing the extinction of the display when you enter your character , necessary in some phone models , the default parameter off) :
OPTIONS :
1. DISABLED - Parameter Off
2. MOUSE MOVE - then move the mouse
3. LEFT CLICK - click the left mouse button
4. RIGHT CLICK - click the right mouse button
5. ENTER PRESS - press the Enter key
Set contains:
- XPIN Clip by Multi-COM
- JACK cable with light sensor
- USB HOST 3in1 with charging for iPhone/iPad/micro USB
- cable OTG micro USB for Android with charging option
- instructions/manual
- warranty
Warranty
We offer 12 months of warranty for this product
|
||
NEGOTIATE PRICE
Additional information about this product:
Information concerning features of this tool :Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions. Complete list of supported models you can find on the official product page, or on the GSM forum (GSMHosting).
Information concerning technical requiments :
The correct use of the purchased goods is required to have a stable internet connection with min . capacity of 1024 kb / s ( download) and 512 kb / s ( upload) . Before you attempt to make software update on the device or want to activate/use service, make sure that you have a sufficient link parameters .
Information concerning the interoperability of digital content:
For using a software or a piece of software that the manufacturer supplies with purchased hardware, in some cases it’s required that you disable your Firewall ( in software or router) and antivirus software. Leaving it enabled can occurs inproper operation of software / services and you will get communications errors like “Error 10060”.
Information concerning hardware requiments:
For proper working with this device producer suggest PC computer with 32-bit Windows XP operating system. We don't guarantee that software/device will work or any other system - especially 64-bit systems, iMac, Linux.
Information concerning IMEI change:
We want to inform that IMEI change option in softwares are intended to use only to repair broken IMEI and retrieve it to original state. It's prohibitted to use this function to change IMEI to diffrent that original. Multi-COM don't answer to any questions related with operation on IMEI number - if you require help in this metter please contact with software/device producer directly. We don't take any responsibility to use this function.
If you are interested in
XPIN Clip with cables set
you will probably want to take a look at following products:
Dedicated equipments for this adapter:
+
|
reSTART Adapter for XPIN Clip
more
|
Price:
199.00 EUR w/o VAT |
+
|
OS800 Adapter for XPIN Clip (iOS 8.0 - 8.1)
more
|
Price:
299.00 EUR w/o VAT |
Available also additional modules:
+
|
Pattern Adapter for XPIN Clip
more
|
Price:
60.00 EUR w/o VAT |
Other products from same category
+
|
MFC Dongle
more
|
Price:
299.00 EUR w/o VAT |
Available also special cables for this device:
+
|
XPIN upgrade firmware USB cable - A-A
more
|
Price:
3.49 EUR w/o VAT |
See also
+
|
Passware Kit Forensic
more
|
Price:
1095.00 EUR w/o VAT |
You might also be interested in:
+
|
XPIN Clip full set (CASE)
more
|
Price:
899.00 EUR w/o VAT |
|
+
|
reSTART Adapter for XPIN Clip
more
|
Price:
199.00 EUR w/o VAT |
+
|
Easy-Box Dongle
more
|
Price:
30.00 EUR w/o VAT |
+
|
EMMC Dongle
more
|
Price:
79.00 EUR w/o VAT |
+
|
Medusa Pro II Box - EMMC (with 4in1 eMMC adapter)
more
|
Price:
569.00 EUR w/o VAT |
+
|
Ir-Key Suite USB
more
|
Price:
50.00 EUR w/o VAT |
+
|
iPad Air ISP NAND adapter for NAND PRO
more
|
Price:
10.00 EUR w/o VAT |
+
|
P3-CARD Polarbox
more
|
Price:
72.00 EUR w/o VAT |
This product was bought most often with:
|
+
|
Pattern Adapter for XPIN Clip
more
|
Price:
60.00 EUR w/o VAT |
+
|
XTC 2 Clip (HTC Android) + Power Adapter
more
|
Price:
149.00 EUR w/o VAT |
|
+
|
OS800 Adapter for XPIN Clip (iOS 8.0 - 8.1)
more
|
Price:
299.00 EUR w/o VAT |
+
|
Universal XC2 charging battery adapter
more
|
Price:
22.00 EUR w/o VAT |
+
|
LCD Opener long version
more
|
Price:
8.00 EUR w/o VAT |
+
|
TRC sensor light cable for XPIN Clip
more
|
Price:
7.00 EUR w/o VAT |
+
|
iP-Box iOS8 Adapter
more
|
Price:
55.00 EUR w/o VAT |
Note
1. Offered by us accessories and replacement parts are not original phone producer parts, but they have been carefully choosen from list of producers to offer highest quality.
2. Our company sale only hardware/HASP/Box - not software for it. Software can be found and downloaded directly from producers webpage.
3. All trademarks mentioned on this site are property of their respective companies. Including product names, logos, commercial symbols, trade names and slogans are trademarks of those respective or related companies, and are protected by international trademark laws, and they are used here only for information purpose.
